Siemens 13-xx-ST-SBT Series Product Data page 252

44 EVAC-NL operating unit FTO2007-N1
Pin assignments
252
Building Technologies
Fire Safety
The operating add-on FCM2008-N1 (option) is installed in the bottom part of the
fire control panel and is connected via the peripheral data bus.
Vext.
Vsys
FC20xx
Peripheryboard
Wiring of the remote EVAC 20-zone display via the RS485 interface
1 Any housing (e.g. ECO housing)
2 Operating add-on FCM2008-N1 with 2 x EVAC-NL FTO2007-N1 (option)
The two EVAC-NL operating units FTO2007-NL must be linked to each other for
synchronization via the peripheral data bus (X400 – X402). If the LED indicators on
the two components do not flash in synch, this indicates that they are not
connected to one another.
1
X1
FCM2008-N1
2
RS485
RS485
FCA2002
PMI & Mainboard
X1
FTI2002
X4
FTI2002
X4
X1 X1
X402
X400
FTO2007 FTO2007
FCM20xx
008837_q_en_--
14.05.2012