Pin Assignments - Siemens 13-xx-ST-SBT Series Product Data

45 EVAC-NL connector board FTI2002-N1 [NL]

Pin assignments

45.3
258
Building Technologies
Fire Safety
Pin assignments
The EVAC-NL connector board FTI2002-N1 is used as an interface from the
EVAC-NL operating unit FTO2007-N1 to the RS485 card in the control panel.
Vext.
Vsys
FC20xx
Peripheryboard
Wiring of the EVAC-NL connector board FTI2002-N1 in a remote EVAC 20-zone indicator
1 Any housing (e.g. ECO housing)
2 Operating add-on FCM2008-N1
FTI2002 EVAC-NL connector board
FTO2007 EVAC-NL operating unit
The two EVAC-NL operating units FTO2007-NL must be linked to each other for
synchronization via the peripheral data bus (X400 – X402). If the LED indicators on
the two components do not flash in synch, this indicates that they are not
connected to one another.
1
X1
FCM2008-N1
2
RS485
RS485
FCA2002
PMI & Mainboard
X1
FTI2002
X4
FTI2002
X4
X1
X1
X402
X400
FTO2007 FTO2007
FCM20xx
008837_q_en_--
14.05.2012