Indicators; Adjustment Elements - Siemens 13-xx-ST-SBT Series Product Data

10.3
LED Color Function
H32 Yellow LINK control indicator
H36 Yellow Processor status indicator
H37 Red Processor status indicator
H38 Red Installation ready for switching off
H39 Red Processor status indicator
H297 Red Reserved
10.4
Building Technologies
Fire Safety
X11 Slot for connection module (card
cage) FCA2006-A1
X12 Slot for network module
(SAFEDLINK) FN2001-A1;
degraded mode module
The serial modules can be loaded in any way. Two identical modules for each
1
PMI & mainboard can also be loaded.

Indicators

Adjustment elements

S32: Reset key
Operation Function
Press for <2 s Station is shut down and restarted in a controlled manner. This
procedure takes up to 5 minutes.
Press for >2 s Station is shut down and restarted immediately. This may lead to
data loss. This procedure takes up to 5 minutes.
Press S32 + positions See below, S38
S38-2 or S38-1
Update firmware or restore factory settings
S38: Switches for booting and operation system options
The two S38 switches have independent functions. Both switches are in the 'OFF'
position as standard.
S38-2 has an impact on booting.
The setting of S38-2 has priority over the setting of S38-1.
Position S38-2 Function
ON Station's firmware is updated.
OFF Station is started normally.
Operating unit with PMI & mainboard FCM2004
S38
Switches for booting and operation
system options
Condition Meaning
Off No Ethernet connection
On Ethernet connection established
Off Processor in normal operation
On
Processor in degraded mode; replace
component or contact hotline
Off Processor in normal operation
On Processor in degraded mode
Off Installation in operation
On Installation may be disconnected from the
mains
Off Processor in normal operation
On Processor in degraded mode; replace
component or contact hotline
10
Indicators
81
008837_q_en_--
14.05.2012