X8 Configurable Inputs/Outputs 1; X7 Rt Alarm And Rt Fault Changeover Contacts - Siemens 13-xx-ST-SBT Series Product Data

7.3.4
7.3.5
Building Technologies
Fire Safety
X8 configurable inputs/outputs 1...4 and supply output 1
Pin Designation
6 GND_01
5 VSYS_01
4 I/O4
3 I/O3
2 I/O2
1 I/O1
Admissible cable cross-section: 0.2...1.5 mm²
All inputs/outputs can be connected as follows:
1 Configured as output
2 Configured as input

X7 RT alarm and RT fault changeover contacts

Pin Designation
6 FAU_NC
5 FAU_COM
4 FAU_NO
3 AL_NC
2 AL_COM
1 AL_NO
Admissible cable cross-section: 0.2...1.5 mm²
Periphery board (2 loops) FCI2002-A1
Description
Supply output 1 (–)
Supply output 1 (+)
Configurable input/output 4
Configurable input/output 3
Configurable input/output 2
Configurable input/output 1
Description
RT fault break contact (normally closed)
RT fault center tap (common)
RT fault make contact (normally open)
RT alarm break contact (normally closed)
RT alarm center tap (common)
RT alarm make contact (normally open)
7
Pin assignments
55
008837_q_en_--
14.05.2012