Technical Data - Siemens 13-xx-ST-SBT Series Product Data

29 I/O card (horn/monitored) FCI2009-A1

Technical data

29.6
General
Supply
Maximum load on the outputs Total current of the monitored outputs
Monitored output
RT alarm/horn
Mechanical data
Ambient conditions
Standards and approvals
170
Building Technologies
Fire Safety
Technical data
Ground fault detection
Operating voltage
Quiescent operating current
Max. operating current (at max. load)
Designation
Design
Output voltage
Output current
Loading capacity
Monitored for (if output inactive)
Measuring range, monitoring resistor
Range of termination resistor (Reol)
for load with diode decoupled (EN54)
Range of the load resistance (Rload)
with load resistor monitoring (VdS)
Line resistance (both cables)
Monitoring tolerance
Measurement cycle
Status monitoring
Duration of the monitoring interruption
when activation was deactivated
Duration of calibration
Dimensions (L x W x H)
Weight
Operating temperature
Storage temperature
Air humidity
VdS
QA Standards
CE conformity mark
LPCP
- For FC2060 via PMI & mainboard FCM2027
- For FC2080 via communication card
FCC2005-A1
Vsys 20...30 V
55 mA with Vsys 24 V
5.6 A with Vsys 20 V
4.7 A with Vsys 24 V
Max. 4 A
'Fire Output 1+'; 'Fire Output 1-'
'Fire Output 2+'; 'Fire Output 2-'
'Fire Output 3+'; 'Fire Output 3-'
'Fire Output 4+'; 'Fire Output 4-'
'Fire Output 5+'; 'Fire Output 5-'
'Fire Output 6+'; 'Fire Output 6-'
'Fire Output 7+'; 'Fire Output 7-'
'Fire Output 8+'; 'Fire Output 8-'
Load or EOL monitoring with calibration
Monitored fuse in operation
Activated in degraded mode operation (RT
alarm/horn can be switched off)
DC 26.4...27.6 V (DC 27.2 V -3 % +1.5 %)
Max. 2 A
Max. 470 µF
Short-circuit
Open line
40...6100
45...5500
45...5200
Max. 200
Load resistance monitoring (VdS): ± 10 %
Load with diode decoupled (EN 54): ±7.1 %
transient ±2.5 %
1 s
4 s
30 s
25 s
160 x 120 x 15 mm
119 g
Min. -5 °C max. +50 °C
Min. -20 max. +60
Max. 93 % rel. air humidity (EN 60068-2)
008837_q_en_--
14.05.2012