Mimic Display Driver Ft2001-A1; Description - Siemens 13-xx-ST-SBT Series Product Data

41 Mimic display driver FT2001-A1

41.1
Building Technologies
Fire Safety

Description

The mimic display driver FT2001-A1 is operated on the FDnet detector line and
permits simple display of events, e.g. alarms and faults. 48 driver outputs are
available, to which the LED ribbon cable F50F410 can be connected, for example.
The synoptic driver is supplied without housing. It is mounted on a carrier plate that
permits installation in any housing. The housing used (by the customer) must have
at least protection category IP30.
The mimic display driver is powered via the FDnet or via an external power supply.
Properties
48 freely programmable driver outputs
Configuration of the driver outputs with SintesoWorks
Communication via FDnet
Power supply via FDnet or an external DC/AC supply
Connections for buzzer, 'buzzer OFF' button and lamp test
Connection for operating LED
Two plug-type connections for one ribbon cable each with 24 user-positionable
LEDs
Mimic display driver FT2001-A1
Description
41
231
008837_q_en_--
14.05.2012