Commissioning
6.10 Wizard - Zero Point adjustment
Step 5 - Summary
Check parameter settings, and click on Back to return and revise values, Apply to save
settings offline, or Apply and Transfer to save settings offline and transfer them to the device.
Image 6-9
The message Quick Start was successful will appear. Click on OK.
See also
Configuring a new device (Page 55)
6.10
Wizard - Zero Point adjustment
Open the menu Device → Wizard → Zero Point Adjustment.
62
Quick start step 5
Operating Instructions, 02/2016, A5E33120874-AC
FC410 with Modbus