SITRANS RD300
Front Panel Buttons and Status LED Indicators
Button
Note:
F4 is a digital input.
Alarms 5-8 are enabled
when relay expansion
module is installed.
Press the Menu button to enter or exit the Programming Mode at
any time.
Press the Right arrow button to move to the next digit during digit
or decimal point programming.
Press or hold the Up arrow button to scroll through the menus,
decimal point, or to increment the value of a digit.
Press the Enter button to access a menu or to accept a setting.
Press and hold the Menu button for three seconds to access the
advanced features of the meter.
A5E31917845
Description
Menu
Right arrow/F1
Up arrow/F2
Enter/F3
SITRANS RD300 – OPERATING INSTRUCTIONS
LED
Status
Alarm 1 – 8 indicators.
1-8
Flashing with M Indicates
Manual Control Mode
R
Rate indicator
Total indicator or
T
Flashing: Tare
G T
Grand Total indicator
Total overflow
▲
indicator
Flashing: Manual control of
flashing relays. M flashing
M
alone indicates manual
analog output. Indicators
flash every 10 seconds.
Page 17