(Ii) Engine Hood - Geely CK Series 2007 Workshop Manual

Engine Hood Removal / Installation
For engine hood installation, see the figure
1. Removal
Warning
• It is dangerous to remove the engine hood without support. The engine hood may drop and
result in body injury. Work with at least one assistant when removing the engine hood and
should follow the procedures below:
1
Disconnect windshield washer hose.
2
Lift up the engine hood and support it with the spring brace;
3
Remove 2 spring braces under the help of the assistant to prevent the engine hood from dropping down
and resulting in body injury;
4
The assistant lifts the engine hood, removes the engine hood hinge bolt and the engine hood;
5
Remove the ventilator louver and remove the hinge arm;
6
Remove the hinge arm bracket attach bolt. Remove the hinge arm bracket from the body;
7
Remove the engine hood lock;
8
Remove the engine hood lock control cable.
2.Installation
1
The installation is in the reverse order of the removal;
2
Adjust the engine hood;
324

(II) Engine Hood

Engine Hood Installation Illustration
Engine Hood
Gas Spring Brace
Engine Hood Hinge
Engine Hood Lock Control Cable
Engine Hood Lock