Data - Codan Envoy Reference Manual

S
CAN TABLES
E
NTRIES FOR A SCAN TABLE

Data

NOTE:
The Data entry sets whether or not scanning is slowed to a value suitable for a
3012-type modem to detect the calling signal from another 3012-type modem, stop
scanning, and initiate the link. If you enable this signal detection, the time that a
transceiver dwells on a channel defaults to 600 msec.
132
The Data entry should be set when using the 2.4 kbit/s Data Modem
or any external modem in a scanning Selcall system. It is not required
when using ALE/CALM systems.
E ™ T R
NVOY RANSCEIVER EFERENCE
M
ANUAL