Modes; Preferred Mode; Power - Codan Envoy Reference Manual

C
HANNELS
E
NTRIES FOR A CHANNEL

Modes

Modes are available in the transceiver when a particular filter is enabled. When the
standard IF filter is enabled, the available modes are USB and LSB. If a different filter
is enabled, other modes are available. For example, if you have a wide IF filter
enabled, USBW and LSBW are available. If you have a narrow Morse filter enabled,
UMCW and LMCW are available.
You can select any or all of the available modes as the allowed modes for a particular
channel. You select the preferred mode from the allowed modes for a particular
channel.
Related links:

Preferred mode

The optional preferred mode is the mode that the transceiver uses by default when this
channel is selected. The preferred mode is selected from the list of allowed modes for
the channel.

Power

The Power entry sets the power level for transmission when this channel is selected.
The actual value that may be selected for each range is set up in the Low Power,
Medium Power and High Power entries in Settings > Configuration.
If you want the transceiver to transmit signals on this channel at:
•
•
•
•
Related links:
120
Modes on page 281
the power level set in the Tx Power entry, select Leave as is
the value set for the low power range, select Low
the value set for the medium power range, select Medium
the value set for the high power range, select High
Low Power on page 221
Medium Power on page 221
High Power on page 222
E ™ T R
NVOY RANSCEIVER EFERENCE
M
ANUAL