Console Ptt; Foot-Switch Ptt; Console External Alarm; Console Easitalk Start State - Codan Envoy Reference Manual

S
ETTINGS
S > C P
ETTINGS ONTROL OINT

Console PTT

The Console PTT entry sets the audio source for the PTT on the desk console to
either an internal or external microphone.
Default value:

Foot-switch PTT

The Foot-switch PTT entry sets the audio source for the foot-switched PTT on the
desk console to either an internal or external microphone.
Default value:

Console External Alarm

The Console External Alarm entry sets whether the alarm output on the 15-way
port of the desk console is enabled or disabled.
The external alarm is a relay that can be wired by a user to ring a bell or to sound a car
horn.
Default value:

Console Easitalk Start State

The Console Easitalk Start State entry sets the state of Easitalk on the desk
console at power up.
If you want the desk console to:
•
•
•
Default value:
218
> C
ONSOLE
Internal microphone
Internal microphone
Enabled
return to the state it was in prior to the desk console being switched off then on
again, select Leave as is
never use Easitalk™ at power up, select Disabled
always use Easitalk™ at power up, select Enabled
Leave as is
E ™ T R
NVOY RANSCEIVER EFERENCE
M
ANUAL