Settings > Gps; Gps Detection Timeout; Gps Show Options - Codan Envoy Reference Manual

S
ETTINGS
S > GPS
ETTINGS
Settings > GPS
The GPS settings enable you to set up how the transceiver handles GPS information.
Related links:

GPS Detection Timeout

The GPS Detection Timeout entry sets the time the transceiver waits to receive
updated GPS information before it shows an error message. The GPS Detection
Timeout entry is only active when the GPS Call option is installed.
NOTE:
When valid GPS data is received, a message is shown on the screen to inform you of
this.
If your transceiver is using static GPS information in the My Position entry, set the
GPS Detection Timeout entry to Disabled.
Available values: Disabled, range specified below
Range: 5 to 30 min
Default value:

GPS Show Options

The GPS Show Options entry sets whether or not altitude and speed information
is shown on the GPS screen and user-status area. By default, altitude and speed data
are hidden.
Available values: Show altitude, Show speed
Default value:
250
GPS Detection Timeout on page 250
GPS Show Options on page 250
GPS Format Options on page 251
My Position on page 252
You cannot make Send Position calls until the transceiver receives
valid GPS information. If you send an Emergency call before valid
GPS information is received, the last known position is sent with the
call. If you receive a Get Position call, the last known position is
returned to the caller.
10 min
no selection
E ™ T R
NVOY RANSCEIVER EFERENCE
M
ANUAL