Voice Detect Sensitivity; Power Down Timeout; Power Down Time; Easitalk Mode - Codan Envoy Reference Manual

S
ETTINGS
S > C
ETTINGS ONFIGURATION

Voice Detect Sensitivity

The Voice Detect Sensitivity entry sets the sensitivity required for voice detection
in the operating environment. In noisy operating environments you may want to
decrease the sensitivity so that mute does not open on general noise.
Range: 1 to 55
Default value:

Power Down Timeout

The Power Down Timeout entry sets the length of inactivity after which the
transceiver powers down.
Range: 1 to 10 hour
Default value:

Power Down Time

The Power Down Time entry sets the local time at which the transceiver powers
down.
NOTE:
Default value:

Easitalk Mode

The Easitalk Mode entry selects a noise-reduction algorithm.
Available values: None, Cepstral, Spectral, MMSE
Default value:

RF Pre-amp

The RF Pre-amp entry switches the RF pre-amplifier on or off.
If you want to:
•
•
Default value:
220
> G
ENERAL
20
Disabled
You must switch the transceiver off then on again for this value to be
activated.
Disabled
Cepstral
increase the receive sensitivity of the RFU, select Enabled
reduce the receive sensitivity of the RFU, select Disabled
Enabled
E ™ T R
NVOY RANSCEIVER EFERENCE
M
ANUAL