Lbt Period; Lbt Data Sensitivity; Lbt Waveform - Codan Envoy Reference Manual

LBT Period

The LBT Period entry sets the length of time that the transceiver listens for calls and
traffic on a channel before starting a call.
Range: 1 to 10 sec
Default value:

LBT Data Sensitivity

The LBT Data Sensitivity entry sets the sensitivity level for detection of false or
weak data signals when LBT is active. In noisy operating environments you may want
to decrease the sensitivity so that LBT does not detect general noise.
Range: –0.500 to +0.500 sec
Default value:

LBT Waveform

The LBT Waveform entry sets the type of waveform that LBT monitors.
If you want outgoing calls to monitor the channel for:
•
•
Default value:
E ™ T R
NVOY RANSCEIVER EFERENCE
2.0 sec
0.0 sec
voice calls, or any call to another station made using a Selcall or ALE/CALM
HF network, select Voice and calls
voice calls, any call to another station made using a Selcall or ALE/CALM HF
network, or any calls made via a data modem, select Voice, calls and data
Voice and calls
M
ANUAL
S
ETTINGS
S > C > G
ETTINGS ALLING ENERAL
235