Settings > Configuration > General; Admin Pin; Noise Limiter - Codan Envoy Reference Manual

Settings > Configuration > General
The general configuration settings enable you to customise underlying operational
items that affect the behaviour of the particular transceiver that you are operating.
These include power levels, access, noise and detection sensitivities, and a number of
general timeouts.
Related links:

Admin PIN

The Admin PIN entry stores a numeric password (up to 8 digits) for access to admin
level in the transceiver.
Default value:

Noise Limiter

The Noise Limiter entry sets whether or not the noise limiter circuit is active.
The noise limiter reduces background impulse noise and ignition noise from cars.
Default value:
E ™ T R
NVOY RANSCEIVER EFERENCE
Admin PIN on page 219
Noise Limiter on page 219
Voice Detect Sensitivity on page 220
Power Down Timeout on page 220
Power Down Time on page 220
Easitalk Mode on page 220
RF Pre-amp on page 220
Tx Power on page 221
Low Power on page 221
Medium Power on page 221
High Power on page 222
Easitalk Start State on page 222
Default Selcall on page 222
Handset AGC on page 222
Handset PTT Beep on page 223
System Lock Override on page 223
Morse Timeout on page 223
PTT Timeout on page 223
Units on page 224
Abandon Mode on page 224
Command Line on page 224
RFU Logging on page 224
no selection
Enabled
M
ANUAL
S > C
ETTINGS ONFIGURATION
S
ETTINGS
> G
ENERAL
219