Changing The Operating Mode Of The Crosspatch - Codan Envoy Reference Manual

Related links:

Changing the operating mode of the crosspatch

To change the operating mode of the crosspatch:
1
1
E ™ T R
NVOY RANSCEIVER EFERENCE
Selecting a peripheral device on page 195
Selecting information to be shown in a status area on page 28
If you are using a 2220 Handset or 2230 Desk Console, press 5.
If you are using a 2221 Handset:
• From the main menu, select
• Press or to scroll to the Next Crosspatch State function.
• Press (OK).
The crosspatch toggles between the following states:
• Off
• Active
• Standby
NOTE: If the status shows
connected.
M
ANUAL
O
PERATING THE TRANSCEIVER
(Functions).
Disconnected, the crosspatch may not be
U
SING A CROSSPATCH
83