Settings > Control Point > Time And Date; Time Zone; Daylight Saving; Clock Type - Codan Envoy Reference Manual

Settings > Control Point > Time and Date
The time and date settings for a control point enable you to set the time zone offset
from UTC of the particular control point that you are operating, daylight saving
differences, and time and date formats.
Related links:

Time Zone

The Time Zone entry sets the difference between the local time and UTC.
Default value:

Daylight Saving

The Daylight Saving entry sets the changes from UTC due to daylight saving.
Available values: Standard time, Summer time
Default value:

Clock Type

The Clock Type entry sets the type of clock that is shown on the Time and Date
screen to either analogue or digital.
Default value:

Time Format

The Time Format entry sets whether the transceiver uses a 12-hour or 24-hour
format.
Default value:
E ™ T R
NVOY RANSCEIVER EFERENCE
Time Zone on page 215
Daylight Saving on page 215
Clock Type on page 215
Time Format on page 215
Date Format on page 216
Setting the time and date on page 40
(+9:30) Adelaide
Standard time
Analogue
12 hour
M
ANUAL
S > C P
ETTINGS ONTROL OINT
S
ETTINGS
> T D
IME AND ATE
215