Codan Envoy Reference Manual page 206

NET
S
W NET
ORKING WITH S
1
1
1
1
1
1
1
1
1
1
1
1
184
Press or to select the value that you want to use from the following:
To make calls from this station to the NET, select Enabled.
•
• To prevent calls being made from this station to the NET, select
Disabled.
Press to move to the In Calls entry.
Press or to select the value that you want to use from the following:
• If your station has the NET programmed and you want to receive calls
from the NET, select Enabled.
• If your station has the NET programmed but you are not a member, and
you do not want to receive any of the NET calls, select Members only.
• If your station is a member of the NET but you do not want to receive any
calls from the NET, select Disabled.
Press to move to the Link entry.
Press or to select the value that you want to use from the following:
• If you want to know with which member stations you have linked, select
Only if response.
• If you do not need to know which of the member stations enter the link,
select Even if no response.
• If you want to link without the delay of the link establishment process,
select Immediately.
to move to the Response entry.
Press
Press or to select the value that you want to use from the following:
• If you want the station to confirm that it has received the link request,
select Send.
• If you want the station to remain silent when it receives the link request
but still enter the link, select Do not send.
to move to the Tune Time entry.
Press
Press or to select the longest time required for tuning antennas within the
NET.
Press to move to the LQA Exchange entry.
Press or to select the value that you want to use from the following:
• If you want the station to add time to the slot for LQA exchange, select
Enabled.
• If you do not want the station to add extra time to the slot, select
Disabled.
Press to move to the Slot Width entry.
E ™ T R
NVOY RANSCEIVER EFERENCE
M
ANUAL