Working with macros
Adding a macro
A macro is one or more steps that combine to make up an action that happens at the
press of the assigned hot key. You should plan the steps of your macro and enter them
in a logical sequence, however, you can move the macro steps later, if required.
NOTE:
To add a macro:
1
1
1
1
1
1
1
E
™ T
R
NVOY
RANSCEIVER
EFERENCE
You can navigate to screens and settings that are available in the access
level into which you are logged.
From the main menu, select
Press
(Options), scroll to Add, then press
Enter the name that you want to use for the macro.
to move to the Keypad Key|Console Only entry.
Press
Press
or
to select the hot key and the type of press (short or long) that you
want to use to invoke the macro.
NOTE:
You can also press or hold the key that you want to set as the hot
key on the control point.
NOTE:
Unassigned is selected by pressing
(Add Step).
Press
Do one of the following:
•
To show a screen, continue from
page
272.
•
To select a peripheral, continue from
peripheral on page
•
To perform an action, continue from
action on page
274.
•
To view or edit a setting, continue from
a setting on page
M
ANUAL
(User Data), then
Adding a step that shows a screen on
Adding a step that selects a
273.
Adding a step that performs an
274.
K
EYS AND MACROS
W
ORKING WITH MACROS
(Macros).
(Select) to add a macro.
from the
keypad key.
Adding a step that views or edits
271
Need help?
Do you have a question about the Envoy and is the answer not in the manual?