Display And Language - EXFO MaxTester Max-610 User Manual

Display and Language

To fit your environment, you may adjust the LCD
brightness, display the time and Active Sync, and
change the display language. The values are kept in
memory when you turn the unit off.
Note: The LCD Backlight consumes battery power; more
brightness, more power consumption.
To adjust the display settings:
1. From
Display and Language.
2. Use the up/down arrow keys to select the setting
to change.
3. Press to




MaxTester Copper Test
, select System Settings, and then
select it.
By using the up/down arrow keys, you can switch between preset
brightness levels in the Backlight item. Press
To display the time and Active Sync in the title bar, enable the item.
Press after your selection to confirm.
Use the up/down arrow keys to navigate between the available
languages, then press
restart your unit.
To set which Home page the unit defaults to when pressing
highlight Start MaxTester using: and select from the list.
Setting Up the MaxTester MAX-610
to select it. You will be prompted to
Display and Language
to confirm.
,
19