EXFO MaxTester Max-610 User Manual page 89

To set parameter values and save results:
1. Press the left/right and up/down arrow keys to highlight the desired
parameter.
2. Press
3. Press the up/down arrow key to highlight the desired value.
OR
4. Press the left arrow key to erase the existing value, and then use the
alphanumeric keypad to enter a value. To cancel the entry, press
5. Press
Select Result File
Select Result File page displays a list of existing file
names where you can save your results.
To save your results to an existing File Name:
1. Use the up/down navigation keys to highlight the
desired File Name.
2. Press
MaxTester Copper Test
to display the list or select the value.
to accept the value.
to confirm your selection.
Setting Up Copper Tests
Saving Results
.
81