Display And Language - EXFO MaxTester 630G User Manual

Display and Language

To fit your work environment, you may adjust the LCD
brightness, display the time and Active Sync, and
change the display language. If your unit has a
touchscreen, you can also calibrate it here. Plus, you
can Enable Screenshots which uses the Home/Help
button. The values are kept in memory when you turn
the unit off.
Note: The LCD Backlight consumes battery power; more
brightness, more power consumption.
To adjust the display settings:
1. From
Display and Language.
2. Use the up/down arrow keys to select the setting to change.
3. Press




Touchscreen Calibration button is only present if your unit has a

touchscreen and the functionality is enabled. To calibrate the
touchscreen, press/tap/click the button to open a popup window and
G.fast/VDSL2/ADSL2+ Multi-play Test Set
, select System Settings, and then
to select it.
By using the up/down arrow keys, you can switch between preset
brightness levels in the Backlight item. Press
To display the time and Active Sync in the title bar, enable the item.
Press after your selection to confirm.
Use the up/down arrow keys to navigate between the available
languages, then press
restart your unit.
To set which Home page the unit defaults to when pressing
highlight Start MaxTester using: and select from the list.
Setting Up the MAX-630G
to select it. You will be prompted to
Display and Language
to confirm.
,
21