Structure Of The Devices; Single-Touch Devices - Siemens SIMATIC IPC377G Operating Instructions Manual

In the BIOS setup, you can configure support of RS232/RS422/RS485 for each COM port.
1
DP++ is a DisplayPort Dual-Mode, and it supports HDMI/DP signal output.
2
MUI: Multi-language user interface; More language packages are available on the USB
3
stick. You can install them according to your request.
1.2

Structure of the devices

1.2.1

Single-touch devices

This section describes the design of 12", 15", 19" and 22" devices, using the 15" device as an
example.
Front view and side view 15"
Front view of 15" device is on the left, and side view is on the right.
① Display/touch screen
② Recesses for mounting clips
③ Mounting seal
Bottom view and top view 15"
Bottom view of 15" device is on the left, and top view is on the right.
①
②
③
SIMATIC IPC377G
Operating Instructions, 07/2022, A5E51366314-AB
Interfaces and operating elements
Recesses for mounting clips
Product label
Overview
1.2 Structure of the devices
11