Technical Specifications; Certificates And Approvals - Siemens SIMATIC IPC377G Operating Instructions Manual

Technical specifications

8.1

Certificates and approvals

Note
Applicability
The following shows the approvals that may be available. For the device itself, it is
certificated as shown on the product label and package label.
ISO 9001 certificate
The Siemens quality management system for all production processes (Design and
Manufacturing of Programmable Logic Controller (PLC), Human Machine Interface (HMI) and
Industrial PC (IPC) used for Industry) meets the requirements of ISO 9001:2015.
Certificate registration no. 01 100 1430201.
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
CE marking
EMC Directive:
2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of the Member States relating to electromagnetic
compatibility; Official Journal of the EU L96, 29/03/2014, p. 79–106
RoHS Directive:
2011/65/EU Directive of the European Parliament and of the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment;
Official Journal of the EU L174, 1/07/2011, p.88–110
EMC
RoHS EN IEC 63000:2018
SIMATIC IPC377G
Operating Instructions, 07/2022, A5E51366314-AB
EN 61000-6-2; EN 61000-6-4
8
61