Technical Specifications; Certificates And Approvals - Siemens SIMATIC IPC277G PRO Operating Instructions Manual

Technical specifications

8.1

Certificates and approvals

Note
Applicability
The following shows the approvals that may be available. For the device itself, it is
certificated as shown on the product label and package label.
ISO 9001 certificate
The Siemens quality management system for all production processes (Development,
Production, Sales and Service of Automation Products, -Systems and -Solutions) meets the
requirements of ISO 9001:2015
This has been certified by DQS (the German society for the certification of quality
management systems).
Certificate registration no. 001323 QM15.
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
CE marking
2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of the Member States relating to electromagnetic
compatibility; Official Journal of the EU L96, 29/03/2014, p. 79–106 (from 20.04.2016)
Low Voltage Directive:
2014/35/EU Directive of the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of the Member States relating to the making available on the
market of electrical equipment designed for use within certain voltage limits; Official Journal
of the EU L96, 29/03/2014, p. 357–374 (from 20.04.2016)
EMC
LVD
SIMATIC IPC277G PRO
Operating Instructions, 02/2022, A5E51373692-AA
EN 61000-6-1, EN 61000-6-3;
EN 61010-2-201:2013;
8
79