Default Setup Settings - Siemens SIMATIC Box PC 840 Manual

5.9

Default Setup Settings

Documenting Your Device Configuration
If you have made any modifications to the default Setup settings, you can enter
them in the following table. You can then refer to these entries if you need to make
any hardware modifications later.
Note
Print the following table out and keep the pages in a safe place once you have
filled in your entries.
System Parameter
Main
System Time
System Date
Diskette A
Primary Master
Primary Slave
Secondary Master
Secondary Slave
Boot Options
Quick Boot Mode
SETUP prompt
POST Errors
Floppy check
Summary screen
Keyboard Features
Num Lock
Key Click
Keyboard auto-repeat rate:
Keyboard auto-repeat delay
Hardware Options
PCI-MPI/DP:
On Board Ethernet
Ethernet Adress
LAN Remote Boot
Legacy USB Support
SafeCard Functions
Fan Control
CRT/LCD selection
LCD Screensize
SIMATIC Box PC 840 Manual
A5E00085984-04
Default Settings
hh:mm:ss
MM/TT/JJJJ
1.44 MB, 3 1/2" / for LS 240:
Disabled
C: 20496 MB
None
None
None
Enabled
Enabled
Enabled
Disabled
Enabled
On
Disabled
30/s
1/2s
Enabled
Enabled
08000624xxxx
Enabled
Disabled
Enabled
Enabled
SIMULTAN
Graph&Text Expanded
Configuring the SIMATIC Box PC 840
Your Entries
5-25