Rear Panel - Steinberg AXR4T Operation Manual

Rear Panel

1
1 DC IN [24V]
For connecting to a power adaptor.
2 [ ] (Thunderbolt2) connector
For connecting the AXR4T to a computer.
NOTICE
Follow the cautions described below when
connecting to a computer. Data could be
destroyed or lost if the computer or the product
hangs. If the computer or the product hangs,
either restart the application and the computer.
• A separate Thunderbolt2-certified cable is
required. Prepare a cable that matches the
connector on the computer and the
Thunderbolt2 connector on the AXR4T
device. Use an adaptor that converts the
computer connector connection to a
Thunderbolt2 standard connector if
necessary.
• Ensure that the PHONES [1]/[2] knob and
output level controls for any power amps or
powered speakers connected to the AXR4 are
set to the minimum before inserting or
removing cables.
• Close down all computer applications before
turning the power to the AXR4 device to
standby (P) or inserting and removing
cables.
• Wait six seconds or longer when turning the
AXR4 device on (I) or in standby (P), and
when inserting or removing cables.
3
2
4 5
Panel Controls and Functions (Main Panel)
6 9
7 8
3 WORD CLOCK [IN]/[OUT] jacks
For connecting external word clock
signals. The WORD CLOCK [IN] jack
terminates internally at 75Ω.
4 MIDI [OUT] jack
For connecting to the MIDI IN jack on MIDI
devices. Outputs a MIDI signals sent from
the computer.
5 MIDI [IN] jack
For connecting to the MIDI OUT jack on
MIDI devices. Sends the MIDI signals
received to the computer.
6 [AES/EBU] connector
For connecting to devices that input or
output digital signals in the AES/EBU
format. You can select between the [AES/
EBU] connector and the 7 OPTICAL B
[IN]/[OUT] connector for use. The jack and
format in use can be set on the DIGITAL I/
O MODE screen on the AXR4 device or on
the Settings screen on the dspMixFx AXR
(page 14).
For more information on the pin arrangement for the
[AES/EBU] connector, see
)
page 73.
AXR4 Operation Manual 6