Steinberg AXR4T Operation Manual page 13

CLOCK screen
This screen is used to configure word clock-
related items such as clock source and
sample rate.
How to open the CLOCK screen
1.
On the SYSTEM SETUP screen, turn the
multi-function knob to select "CLOCK."
2.
Press the multi-function knob to confirm.
MAIN display area
This area displays options in a list.
MASTER For setting the clock source
SAMPLE RATE For configuring word clock-
related settings such as clock
source and sample rate
AES/EBU CH For setting which channel in the
AES/EBU should be the source
channel when AES/EBU is set as
the clock source
Panel Controls and Functions (Main Panel)
• MASTER
Allows you to set the clock source from the list.
Available options are as follows.
INTERNAL
The internal AXR4 clock
WCLK External clock from the WORD
CLOCK IN jack
*1*3
ADAT A
External clock from ADAT A
*1
S/PDIF A
External clock from S/PDIF A
*2*3
ADAT B
External clock from ADAT B
*2
S/PDIF B
External clock from S/PDIF B
*2
AES/EBU
External clock from AES/EBU
*1 Either ADAT A or S/PDIF A will be displayed based on
the digital I/O mode settings
*2 Either ADAT B, S/PDIF B, or AES/EBU will be
displayed based on the digital I/O mode settings
configured.
*3 If ADAT A or ADAT B is selected as the clock source,
you must select an operating sample rate for the
AXR4 matching the sample rate of the clock source.
NOTICE
Changing word clock settings in this product or
any digital audio system may result in system
noise. To prevent damaging connected speakers,
either turn off the power amp and other devices, or
restrict their output before configuring word clock
settings.
(page 15) configured.
AXR4 Operation Manual 13