Steinberg AXR4T Operation Manual page 5

5 SILK [ON] key
Turns Silk on and off for the channel
selected with the [SEL] key. This lights up
white when turned on.
Silk
Silk is an important transformer feature
designed by Rupert Neve Designs. We
made a faithful recreation of the Silk circuit
using digital signal processing based on
Yamaha's proprietary VCM (Virtual
Circuitry Modeling) technology. Silk helps
vividly accentuate individual audio parts.
6 SILK [TEXTURE] knob
Adjusts the harmonic content of the source
audio.
7 SILK [BLUE/RED] key
Switches between BLUE acting on low
frequency bands, and RED acting on high
frequency bands.
8 [CH] (Channel) key
Displays the CH SETUP screen on the
display. This lights up green when
selected.
9 [MONI] (Monitor) key
Displays the MONITOR SETUP screen on
the display. This lights up green when
selected.
) [MUTE] key
Mutes all output audio at once. This
flashes red when muted.
! [HOME/ESC] key
Returns to the previous display screen.
Press this several times to eventually
return to the HOME screen. You can also
return to the HOME screen by holding this
key down.
@ [SCENE] key
Displays the SCENE screen on the display.
This lights up green when selected.
# [SETUP] key
Displays the SYSTEM SETUP screen on
the display. This lights up green when
selected.
Panel Controls and Functions (Main Panel)
$ Display
Displays information needed to use and
configure the AXR4 device.
% Multi-function knob
Used to operate the screen in the display.
Turn to move between items, and press in
to select an item.
^ PHONES [1]/[2] knobs
Adjusts the output signal level for the
PHONES [1]/[2] jack.
& PHONES [1]/[2] jacks
For connecting headphones. Output
signals for both the PHONES [1] jack and
the PHONES [2] jack can be routed on the
OUTPUT PATCH screen. This can also be
set in the Cubase series-specific AXR
Extension window (page
dspMixFx AXR Mixer window
* [P/I] (Standby/On) switch
Turns the product on (I) or puts it into
standby mode (P).
NOTICE
Even when the power is in the standby position
(P), electricity is still flowing to the product. If
you do not plan to use the product for a while,
unplug the power cord from the outlet.
Switching off to on quickly can cause malfunctions.
After setting the [P/I] (standby/on) switch to
standby, wait for about six seconds before setting it
to on again.
56), or the
(page 37).
AXR4 Operation Manual 5