Steinberg AXR4T Operation Manual page 22

MAIN display area
This area displays options in a list. The current
setting value is displayed to the right of each
field.
GAIN For setting analog circuit input
gain
PAD For switching PAD on and off for
analog circuits
+48V For switching phantom power on
and off for analog circuits
PHASE For switching the input signal
phase from positive to negative
HPF For switching the high pass filter
on and off
HPF (FREQ) For changing the cutoff
frequency for the high pass filter
HI-Z For switching HI-Z on and off for
analog circuits
Display and dspMixFx AXR parameters are linked.
Panel Controls and Functions (Main Panel)
• GAIN
How to configure
1.
On the ANALOG SETUP (MIC) screen, turn
the multi-function knob to select "GAIN."
2.
Press the multi-function knob to select.
3.
When the dialog screen appears, turn the
multi-function knob to select a value.
• The input meter will appear on the lower part of
the settings dialog screen. Adjusting the audio
while watching the meter allows you to adjust gain
visually.
• If the PAD is already on, the screen will display the
GAIN value damping -20(dB) in advance.
Settings details are as follows.
Setting range
+15(dB) to +68(dB)
Step
1(dB)
AXR4 Operation Manual 22