Steinberg AXR4T Operation Manual page 16

CONVERSION MODE screen
This screen is used to set the filter for the AD/
DA converter.
The AD/DA converter has two filter setting
options available: LINEAR PHASE and SHORT
DELAY. There are some sonic differences
between the two filter settings. Select the one
most suitable for your applications.
How to open the CONVERSION MODE
screen
1.
On the SYSTEM SETUP screen, turn the
multi-function knob to select
"CONVERSION MODE."
2.
Press the multi-function knob to confirm.
How to use the CONVERSION MODE
screen
1.
Turn the multi-function knob to select either
"LINEAR PHASE" or "SHORT DELAY."
2.
Press the multi-function knob to confirm.
Panel Controls and Functions (Main Panel)
BRIGHTNESS screen
This screen is used to set the brightness of the
display and LED colors.
Available options are as follows.
LCD For setting the brightness of
the AXR4 device display
LED(RED) For setting the brightness of
the red LED
LED(BLUE)
For setting the brightness of
the blue LED
LED(WHITE) For setting the brightness of
the white LED
LED(GREEN) For setting the brightness of
the green LED
How to configure the BRIGHTNESS
1.
On the SYSTEM SETUP screen, turn the
multi-function knob to select
"BRIGHTNESS."
2.
Press the multi-function knob to select.
3.
When the BRIGHTNESS screen appears,
turn the multi-function knob to select an
option.
4.
Press the multi-function knob to select.
5.
When the dialog screen appears, turn the
multi-function knob to set a brightness
value.
6.
Press the multi-function knob to close the
dialog screen.
AXR4 Operation Manual 16