Steinberg AXR4T Operation Manual page 20

OUTPUT PATCH screen
This screen is used to set the mix bus to be
assigned to the output jack.
How to open the OUTPUT PATCH
screen
1.
On the MONITOR SETUP screen, turn the
multi-function knob to select "OUTPUT
PATCH."
2.
Press the multi-function knob to confirm.
MAIN display area
The names of each output jack appear on the
left, and the names of the currently set mix bus
appear on the right.
How to use the OUTPUT PATCH screen
1.
Turn the multi-function knob to select an
output jack.
2.
Press the multi-function knob to select.
3.
When the list of available mix buses
appears, turn the multi-function knob to
select a mix bus.
4.
Press the multi-function knob to confirm.
Panel Controls and Functions (Main Panel)
WARNING
To avoid loud sounds unintentionally coming
through speakers and headphones, check that the
volume of powered speakers, amps, and
headphones (the PHONES [1]/[2] knob for the
AXR4 device) is set to the minimum level before
configuring output patch settings.
MAIN OUT SETUP screen
This screen is used to set the mix bus for
which levels are controlled when turning the
multi-function knob on the METER screen.
How to open the MAIN OUT SETUP
screen
1.
On the MONITOR SETUP screen, turn the
multi-function knob to select "MAIN OUT
SETUP."
2.
Press the multi-function knob to confirm.
MAIN display area
This area displays a list of mix buses.
How to use the MAIN OUT SETUP
screen
1.
Turn the multi-function knob to select a mix
bus.
2.
Press the multi-function knob to confirm.
AXR4 Operation Manual 20