Connection Example; Cautions For Rack-Mounting - Steinberg AXR4T Operation Manual

Connection Example

Refer to the following connection example to connect speakers, microphones, or instruments.
Guitar
Computer
Word Clock
Generator

Cautions for Rack-mounting

This product has been tested to function at a
room temperature of 0 – 40°C. When mounting
this product together with other devices into
an EIA-standard rack, the product may not be
able to deliver sufficient performance due to
the increased temperature caused by the heat
produced by other devices. Mount this
product in a rack under the following
conditions to ensure that heat does not build
up.
• Leave at least 1U of space empty both
above and below the product. Ensure that
empty spaces are properly ventilated by
installing a ventilation panel or allowing for
open air exposure.
• Open up the rear of the rack and separate
the rack from the wall by at least 10 cm to
ensure proper ventilation. If this is not
possible, install a commercially available fan
kit or other such forced ventilation device.
Note that when installing a fan kit, closing off
Microphone
Sound Module
Panel Controls and Functions (Main Panel)
Headphones
Monitor
Speakers
Microphone
Preamp
the rear of the rack may help improve heat
loss. For more information, see the owner's
manuals for your rack and fan kit.
NOTICE
This product has been designed to support a LINE
OUTPUT load impedance of 10kΩ or more.
As a load impedance of less than 10kΩ can cause
issues with heat generation, do not connect
devices with an input impedance of less than 10kΩ.
Synthesizer
Outboard Effects
AXR4 Operation Manual 8