Steinberg AXR4T Operation Manual page 25

ANALOG SETUP screen (LINE)
This screen is used to configure audio
controls for signal inputs through the LINE
INPUT [5] – [12] jacks.
How to open the ANALOG SETUP
screen (LINE)
1.
On the CH SETUP screen, turn the multi-
function knob to select "TOOL BAR
Display Area."
2.
Press the multi-function knob to select.
3.
When the list of available hardware inputs
appears, turn the multi-function knob to
select a hardware input from LINE IN 5 to
LINE IN 12.
4.
Press the multi-function knob to confirm.
5.
On the CH SETUP screen, turn the multi-
function knob to select "ANALOG SETUP."
6.
Press the multi-function knob to confirm.
MAIN display area
This area displays options in a list. The current
setting value is displayed to the right of each
field.
RANGE For setting the expected input
signal level for analog circuits
PHASE For switching the input signal
phase from positive to negative
HPF For switching the high pass filter
on and off
HPF (FREQ) For changing the cutoff
frequency for the high pass filter
Panel Controls and Functions (Main Panel)
• RANGE
How to configure
1.
On the ANALOG SETUP (LINE) screen,
turn the multi-function knob to select
"RANGE."
2.
Press the multi-function knob to select.
3.
When the screen appears, turn the multi-
function knob to select either -10 dBV,
+4 dBu (14 dB), or +4 dBu (20 dB).
The number in the parentheses for +4 dBu (20) and
+4 dBu (14) represents the headroom (dB).
4.
Press the multi-function knob to confirm.
• PHASE
How to configure
1.
On the ANALOG SETUP (LINE) screen,
turn the multi-function knob to select
"PHASE."
2.
Press the multi-function knob to select.
3.
When the dialog appears, turn the multi-
function knob to select either "ON" or
"OFF."
4.
Press the multi-function knob to confirm.
AXR4 Operation Manual 25