Monitor Setup Screen - Steinberg AXR4T Operation Manual

MONITOR SETUP Screen

This screen is used to configure monitor
output settings.
How to open the MONITOR SETUP
screen
Press the [MONI] key on the AXR4 device
panel to open the MONITOR SETUP screen.
MAIN display area
This area displays options in a list.
PHONES
For setting the mix bus assigned
PATCH
to the PHONES jack
OUTPUT
For setting the mix bus assigned
PATCH
to the output jack
MAIN OUT For setting the mix bus for which
levels are controlled when
SETUP
turning the multi-function knob
on the METER screen
PHONES PATCH screen
This screen is used to set the mix bus to be
assigned to the output jack.
Panel Controls and Functions (Main Panel)
How to open the PHONES PATCH
screen
1.
On the MONITOR SETUP screen, turn the
multi-function knob to select "PHONES
PATCH."
2.
Press the multi-function knob to confirm.
MAIN display area
The names of each output jack appear on the
left, and the names of the currently set mix bus
appear on the right.
How to use the PHONES PATCH screen
1.
Turn the multi-function knob to select an
output jack.
2.
Press the multi-function knob to select.
3.
When the list of available mix buses
appears, turn the multi-function knob to
select a mix bus.
4.
Press the multi-function knob to confirm.
WARNING
To avoid loud sounds unintentionally coming
through headphones, check that the headphone
volume (PHONES [1]/[2] knob) is set to the
minimum level before configuring output patch
settings.
AXR4 Operation Manual 19