Steinberg AXR4T Operation Manual page 47

<command> key + left click
Used to select multiple individual grid cells by
clicking on grid cells while holding down the
<command> key. Click the grid area selected
to deselect selected cells.
When multiple grid cells are selected, hold down the
<control> key and click to display the settings menu and
set the routing point for all selected cells.
<control> key + mouse wheel
Used to change the level and degree of pan
applied.
• Rotate mouse wheel forwards: Send amount
increases, PAN shifts to right
• Rotate mouse wheel backwards: Send
amount decreases, PAN shifts to left
Mono is used as the unit for Matrix Mixer display items
and settings.
As such, the following settings may be applied
automatically under certain circumstances.
• Grid is turned on/off based on the pan settings
applied.
For example, if a stereo-configured MIC 1/2 input is
routed to a LINE 1/2 hardware output, the following will
occur.
Panel Controls and Functions (Software)
If the pan setting is moved to the leftmost in this state,
the signal being sent to the right will stop and the
equivalent grid area on the right will automatically be
turned off.
• When a fader bottoms out on the Mixer window, the
corresponding grid will be turned off.
AXR4 Operation Manual 47