Steinberg AXR4T Operation Manual page 66

Compressor
1
2
3
4
5
6
7
8
1 ATTACK
Adjusts the attack time of the compressor.
Range: 0.092 msec – 80.00 msec
2 RELEASE
Adjusts the release time of the
compressor.
Range: 9.3 msec – 999.0 msec
3 RATIO
Adjusts the ratio of the compressor.
Range: 1.00 – ∞
4 KNEE
Used to select the knee type of the
compressor.
Knee type Description
SOFT Produces the most gradual
change.
MEDIUM Results in a setting midway
between SOFT and HARD.
HARD Produces the sharpest change.
5 SIDE CHAIN Q
Adjusts the band width of the side chain
filter.
Range: 0.50 – 16.00
6 SIDE CHAIN F
Adjusts the center frequency of the side
chain filter.
Range: 20.0 Hz – 20.0 kHz
7 SIDE CHAIN G
Adjusts the gain of the side chain filter.
Range: -18.0 dB – +18.0 dB
8 COMPRESSOR On/Off
Turns the compressor on (lit) and off
(dark).
9
9 Compressor Curve
)
Indicates the approximate compressor
response.
The vertical axis indicates the output
! signal level, and the horizontal axis
indicates the input signal level.
) Gain Reduction Meter
Displays the gain reduction amount of the
compressor.
! DRIVE
Adjusts the degree to which the
compressor is applied.
The higher the value, the greater the effect.
Range: 0.00 – 10.00
Equalizer
1
2
3
4
5
6
1 Equalizer Curve
Indicates the characteristics of the 3-band
equalizer.
The vertical axis indicates the gain, and
the horizontal axis indicates the frequency.
You can adjust LOW, MID, and HIGH by
dragging each handle in the graph.
2 LOW F
Adjusts the center frequency of the low
band.
Range: 20.0 Hz – 1.00 kHz
3 LOW G
Adjusts the gain of the low band.
Range: -18.0 dB – +18.0 dB
Panel Controls and Functions (Software)
7
8
9
AXR4 Operation Manual 66