Steinberg AXR4T Operation Manual page 26

• HPF
How to configure
1.
On the ANALOG SETUP (LINE) screen,
turn the multi-function knob to select
"HPF."
2.
Press the multi-function knob to select.
3.
When the dialog appears, turn the multi-
function knob to select either "ON" or
"OFF."
4.
Press the multi-function knob to confirm.
• HPF (FREQ)
How to configure
1.
On the ANALOG SETUP (LINE) screen,
turn the multi-function knob to select
"HPF (FREQ)."
2.
Press the multi-function knob to select.
3.
When the screen appears, turn the multi-
function knob to select a cutoff frequency.
4.
Press the multi-function knob to confirm.
Panel Controls and Functions (Main Panel)
SILK SETUP screen
This screen is used to configure Silk settings.
How to open the SILK SETUP screen
1.
On the CH SETUP screen, turn the multi-
function knob to select "TOOL BAR
Display Area."
2.
Press the multi-function knob to select.
3.
When the list of available hardware inputs
appears, turn the multi-function knob to
select a hardware input from MIC IN 1 to
MIC IN 4.
4.
Press the multi-function knob to confirm.
5.
On the CH SETUP screen, turn the multi-
function knob to select "SILK."
6.
Press the multi-function knob to confirm.
To navigate to the SILK SETUP screen, use either the
SILK [ON] key, the SILK [TEXTURE] knob, or the SILK
[BLUE/RED] key on the front of the AXR4 device.
MAIN display area
This area displays options in a list. The current
setting value is displayed to the right of each
field.
SILK
Turns Silk on and off
TYPE
Changes the Silk type
TEXTURE Adjusts the amount of Silk
processing
AXR4 Operation Manual 26