Steinberg AXR4T Operation Manual page 14

How to configure the MASTER
1.
Navigate from the SYSTEM SETUP screen
to the CLOCK screen, and then turn the
multi-function knob to select "MASTER."
2.
Press the multi-function knob to select.
3.
When the MASTER screen appears, turn
the multi-function knob to select a clock
source.
4.
Press the multi-function knob to confirm.
• SAMPLE RATE
Allows you to select an operating sample rate
from the list.
There are eight sample rate options available,
including, 44.1k, 48k, 88.2k, 96k, 176.4k,
192k, 352.8k, and 384k.
Note that the 352.8k and 384k sample rate are only
available when the clock master is set to "INTERNAL" or
"WCLK."
For more information on what inputs and
outputs are available for each sample rate,
see the Operation Correspondence Table
(page 68).
How to configure the SAMPLE RATE
1.
Navigate from the SYSTEM SETUP screen
to the CLOCK screen, and then turn the
multi-function knob to select "SAMPLE
RATE."
2.
Press the multi-function knob to select.
Panel Controls and Functions (Main Panel)
3.
When the SAMPLE RATE screen appears,
turn the multi-function knob to select a
sample rate.
4.
Press the multi-function knob to confirm.
• AES/EBU CH
Allows you to set the channel in the AES/EBU
from which the clock source is received when
AES/EBU is set as the clock source.
How to configure the AES/EBU CH
1.
Navigate from the SYSTEM SETUP screen
to the CLOCK screen, and then turn the
multi-function knob to select "AES/EBU
CH."
2.
Press the multi-function knob to select.
3.
When the AES/EBU CH screen appears,
turn the multi-function knob to select a
channel.
4.
Press the multi-function knob to confirm.
AXR4 Operation Manual 14