Ch Setup Screen - Steinberg AXR4T Operation Manual

CH SETUP Screen

This screen is used to configure AXR4
hardware inputs.
How to open the CH SETUP
screen
Press the [CH] key on the AXR4 device panel
to open the CH SETUP screen.
TOOL BAR display area
This area displays available hardware inputs.
MAIN display area
This area displays options in a list.
ANALOG For configuring audio control
components at the hardware inputs
SETUP
Options appearing on the following
screen will vary depending on the
channel selected.
SILK For configuring SILK-related
settings
Panel Controls and Functions (Main Panel)
ANALOG SETUP screen (MIC)
This screen is used to configure audio
controls for signal inputs through the MIC/
LINE/HI-Z [1]/[2] jack and the MIC/LINE [3]/[4]
jack.
How to open the ANALOG SETUP
screen (MIC)
1.
On the CH SETUP screen, turn the multi-
function knob to select "TOOL BAR
Display Area."
2.
Press the multi-function knob to select.
3.
When the list of available hardware inputs
appears, turn the multi-function knob to
select a hardware input from MIC IN1 to
MIC IN4.
4.
Press the multi-function knob to confirm.
5.
On the CH SETUP screen, turn the multi-
function knob to select "ANALOG SETUP."
6.
Press the multi-function knob to confirm.
When a screen other than the CH SETUP screen is in
use, press the [SEL] key on the front of the AXR4 device
to display the ANALOG SETUP screen for the channel
corresponding to the [SEL] key.
AXR4 Operation Manual 21