Steinberg AXR4T Operation Manual page 17

PANEL LOCK screen
This screen is used to lock operations from
panel switches and encoder. Attempting to
use locked switches and encoder operations
will display a message dialog screen for a set
period of time.
How to configure PANEL LOCK
1.
On the SYSTEM SETUP screen, turn the
multi-function knob to select "PANEL
LOCK."
2.
Press the multi-function knob to confirm.
How to release configured PANEL LOCK
Press and hold down the [SETUP] key on the
AXR4 device.
Panel Controls and Functions (Main Panel)
STACK ID screen
This screen is used to assign an ID to the
AXR4 device to identify the device when
multiple AXR4 devices are connected.
• Up to three AXR4 devices can be stacked. You cannot
use four or more connected AXR4 devices together.
• You cannot use multiple connected AXR4 devices by
duplicating the STACK ID.
• An assigned STACK ID will be applied after a power
cycle.
• A STACK ID can only be set from the screen.
How to configure a STACK ID
1.
On the SYSTEM SETUP screen, turn the
multi-function knob to select "STACK ID."
2.
Press the multi-function knob to select.
3.
When the dialog screen appears, turn the
multi-function knob to select a number
from 1, 2 or 3.
4.
Press the multi-function knob to confirm.
5.
Set the [P/I] (standby/on) switch on the
front panel of the AXR4 device into the
standby position ([P]).
6.
Set the [P/I] (standby/on) switch on the
front panel of the AXR4 device into the
[I] position.
AXR4 Operation Manual 17