Steinberg AXR4T Operation Manual page 52

Output Routing
This area is used to configure routing settings
from mix buses to output connector. Output
connector will appear from top to bottom to
the right of Output Routing, and mix buses will
appear from left to right above Output
Routing. Mono is used as the unit for settings.
• Mix bus name changes made on the Mixer window will
also apply to Output Routing. Mix bus names cannot
be changed on the Output Routing window.
• A single bus can be assigned to multiple output
connector. Multiple buses cannot be assigned to a
single output connector.
• Use the mouse to click to configure the routing setting.
Panel Controls and Functions (Software)
AXR4 Operation Manual 52