Steinberg AXR4U Operation Manual
  1. Manuals
  2. Brands
  3. Steinberg Manuals
  4. Recording Equipment
  5. AXR4U
  6. Operation manual

Steinberg AXR4U Operation Manual

Hide thumbs Also See for AXR4U:
Table of Contents

Advertisement

Quick Links

Download this manual
Operation Manual
EN

Advertisement

Table of Contents
loading

Related Manuals for Steinberg AXR4U

Summary of Contents for Steinberg AXR4U

  • Page 1 Operation Manual...

  • Page 2: Table Of Contents

    • The illustrations and screens as shown in this Settings Window ..........56 manual are for instructional purposes only. Building a Monitoring Environment....59 • Steinberg Media Technologies GmbH and Stacking the AXR4T ........61 Yamaha Corporation make no representations or warranties with regard to the use of the software...

  • Page 3: Introduction

    The Steinberg Hardware Development Team AXR4 Operation Manual...

  • Page 4: Panel Controls And Functions (Main Panel)

    Panel Controls and Functions (Main Panel) Panel Controls and Functions (Main Panel) Front Panel & 1 MIC/LINE/HI-Z [1]/[2] jacks 4 [+48V] indicators For connecting to a microphone, digital Lights up in red when the phantom power instrument, electric guitar, or electric bass. is turned on.
  • Page 5 Panel Controls and Functions (Main Panel) 5 SILK [ON] key $ Display Turns Silk on and off for the channel Displays information needed to use and selected with the [SEL] key. This lights up configure the AXR4 device. white when turned on. % Multi-function knob Silk Used to operate the screen in the display.

  • Page 6: Rear Panel

    Thunderbolt 2 adapter is not required when • Close down all computer applications before your computer is equipped with a turning the power to the AXR4U device to Thunderbolt 2 connector. standby (P) or inserting and removing • Ensure that the PHONES [1]/[2] knobs and cables.
  • Page 7 Panel Controls and Functions (Main Panel) 3 WORD CLOCK [IN]/[OUT] jacks 7 OPTICAL B [IN]/[OUT] connector For connecting external word clock Supports both S/PDIF and ADAT formats. You can select between the 6 [AES/EBU] signals. The WORD CLOCK [IN] jack terminates internally at 75Ω.

  • Page 8: Connection Example

    Panel Controls and Functions (Main Panel) Connection Example See the following connection example (AXR4T) to connect speakers, microphones, or instruments. Guitar Microphone Headphones Computer Monitor Synthesizer Speakers Word Clock Microphone Sound Module Outboard Effects Generator Preamp Cautions for Rack-mounting the rear of the rack may help improve heat loss.

  • Page 9: Display

    3 Sample rate Displays the sample rate in use by the AXR4 device. MAIN area (AXR4U only) METER Screen When communicating with a computer at the High- Speed (USB 2.0) setting, the background color of TOOL BAR is displayed in green.

  • Page 10: Scene Screen

    Panel Controls and Functions (Main Panel) 5 Input meter from computer SCENE Screen 6 LINE OUT meter This screen is used to store and recall scenes. 7 ADAT A or S/PDIF A OUT meter 8 ADAT B or S/PDIF B or AES/EBU OUT meter 9 Output meter to computer ) PHONES OUT meter...

  • Page 11: System Setup Screen

    • Scene names can be set in “dspMixFx AXR”  “Menu”  “Scene” (page 49). AXR4U Recall Recalls the selected scene If you press the [HOME/ESC] key while the confirmation dialog is displayed, the confirmation dialog will be closed without performing an action.
  • Page 12 For assigning an ID to the AXR4 device to identify the device (AXR4T only) when multiple AXR4 devices are connected USB MODE For setting the USB operation (AXR4U only) mode INFO/ For displaying information on this product, and resets settings INITIALIZE to their defaults...
  • Page 13 Panel Controls and Functions (Main Panel) How to use the CH LINK screen CLOCK screen This screen is used to configure word clock- Turn the multi-function knob to select a related items such as clock source, sample channel pair. rate, and SRC (Sample Rate Converter). Press the multi-function knob to display the settings dialog.
  • Page 14 Panel Controls and Functions (Main Panel) • MASTER How to configure the MASTER Allows you to set the clock source from the list. Navigate from the SYSTEM SETUP screen to the CLOCK screen, and then turn the multi-function knob to select “MASTER.” Press the multi-function knob to select.
  • Page 15 Panel Controls and Functions (Main Panel) How to configure the SAMPLE RATE • AES/EBU CH Allows you to set the channel in the AES/EBU Navigate from the SYSTEM SETUP screen from which the clock source is received when to the CLOCK screen, and then turn the AES/EBU is set as the clock source.
  • Page 16 Panel Controls and Functions (Main Panel) DIGITAL I/O MODE screen PEAK HOLD screen This screen is used to set whether to use the This screen sets the peak level display for the connector in S/PDIF format or ADAT format level meter on or off. when using the OPTICAL A [IN]/[OUT] connector.
  • Page 17 Panel Controls and Functions (Main Panel) HPF screen CONVERSION MODE screen This screen is used to set the cutoff frequency This screen is used to set the filter for the AD/ for the high pass filter. DA converter. The AD/DA converter has two filter setting options available: LINEAR PHASE and SHORT DELAY.
  • Page 18 Panel Controls and Functions (Main Panel) BRIGHTNESS screen PANEL LOCK screen This screen is used to set the brightness of the This screen is used to lock operations from display and LED colors. panel switches and encoder. Attempting to use locked switches and encoder operations will display a message dialog screen for a set period of time.
  • Page 19 Set the [P/I] (standby/on) switch on the computer. front panel of the AXR4T device into the • If the AXR4U is connected to dspMixFx AXR or [I] position. Cubase, you cannot change the USB MODE setting. Close dspMixFx AXR or Cubase.
  • Page 20 “OK” or “CANCEL.” ABOUT Displays information about the AXR4 Press the multi-function knob to confirm. device and The AXR4U automatically restarts. information about the card slot on the rear of the AXR4 device INITIALIZE CURRENT Restores all current...
  • Page 21 Panel Controls and Functions (Main Panel) How to perform the INITIALIZE feature Navigate from the SYSTEM SETUP screen to the INFO/INITIALIZE screen, and then turn the multi-function knob to select “INITIALIZE.” Press the multi-function knob to select. When the INITIALIZE screen appears, turn the multi-function knob to select either “CURRENT DATA”...

  • Page 22: Monitor Setup Screen

    Panel Controls and Functions (Main Panel) MONITOR SETUP Screen How to open the PHONES PATCH screen This screen is used to configure monitor output settings. On the MONITOR SETUP screen, turn the multi-function knob to select “PHONES PATCH.” Press the multi-function knob to confirm. MAIN display area The names of each output jack appear on the left, and the names of the currently set mix bus...
  • Page 23 Panel Controls and Functions (Main Panel) OUTPUT PATCH screen This screen is used to set the mix bus to be WARNING assigned to the output jack. To avoid loud sounds unintentionally coming through speakers and headphones, check that the volume of powered speakers, amps, and headphones (the PHONES [1]/[2] knob for the AXR4 device) is set to the minimum level before configuring output patch settings.

  • Page 24: Ch Setup Screen

    Panel Controls and Functions (Main Panel) CH SETUP Screen ANALOG SETUP screen (MIC) This screen is used to configure audio This screen is used to configure AXR4 controls for signal inputs through the MIC/ hardware inputs. LINE/HI-Z [1]/[2] jack and the MIC/LINE [3]/[4] jack.
  • Page 25 Panel Controls and Functions (Main Panel) MAIN display area • GAIN This area displays options in a list. The current setting value is displayed to the right of each field. How to configure On the ANALOG SETUP (MIC) screen, turn the multi-function knob to select “GAIN.”...
  • Page 26 Panel Controls and Functions (Main Panel) • PAD • +48V How to configure NOTICE When connecting devices or when switching the On the ANALOG SETUP (MIC) screen, turn routing structure, observe the following cautions to the multi-function knob to select “PAD.” avoid damage and noise being introduced to the product and peripheral devices.
  • Page 27 Panel Controls and Functions (Main Panel) • PHASE • HI-Z How to configure How to configure On the ANALOG SETUP (MIC) screen, turn On the ANALOG SETUP (MIC) screen, turn the multi-function knob to select “PHASE.” the multi-function knob to select “HI-Z.” Press the multi-function knob to select.
  • Page 28 Panel Controls and Functions (Main Panel) ANALOG SETUP screen (LINE) • PAD This screen is used to configure audio controls for signal inputs through the LINE INPUT [5] – [12] jacks. How to open the ANALOG SETUP screen (LINE) On the CH SETUP screen, turn the multi- function knob to select “TOOL BAR Display Area.”...
  • Page 29 Panel Controls and Functions (Main Panel) • HPF SILK SETUP screen This screen is used to configure Silk settings. How to open the SILK SETUP screen On the CH SETUP screen, turn the multi- function knob to select “TOOL BAR Display Area.”...
  • Page 30 Panel Controls and Functions (Main Panel) • SILK • TEXTURE How to configure How to configure On the SILK SETUP screen, turn the multi- On the SILK SETUP screen, turn the multi- function knob to select “SILK.” function knob to select “TEXTURE.” Press the multi-function knob to select.

  • Page 31: Software

    Yamaha Steinberg Thunderbolt AXR4 Window Driver For selecting the AXR4T settings. Yamaha Steinberg Thunderbolt Driver is a software program that allows communication between the AXR4T and a computer. In Control Panel, you can configure the basic settings for the audio driver.
  • Page 32  [Studio Setup], then click [Control Panel] in 44.1 kHz/ 32 Samples to 2048 Samples [Yamaha Steinberg Thunderbolt] or [Yamaha 48 kHz Steinberg Thunderbolt (High Precision)] in the 88.2 kHz/ 64 Samples to 4096 Samples menu on the left side of the window. 96 kHz 176.4 kHz/...

  • Page 33: Yamaha Steinberg Usb Driver

    For selecting the AXR4U settings. Yamaha Steinberg USB Driver is a software program that allows communication between Windows the AXR4U and a computer. In Control Panel, you can configure the basic settings for the audio driver. How to Open the Window Windows •...
  • Page 34 For selecting the device on which the ASIO driver is used. This is enabled when two or more devices supported by the Yamaha Steinberg USB Driver are connected to the computer. 5 Mode How to Select the Sample Rate (Mac) For selecting the latency mode.
  • Page 35 Using with 32-bit Integer Processing (Mac) In Cubase, you can select [Steinberg AXR4] or [Steinberg AXR4 (High Precision)]. Select [Steinberg AXR4 (High Precision)] when processing at 32-bit integer resolutions between Cubase and the driver.

  • Page 36: Dspmixfx Axr

    Software dspMixFx AXR This software is used to operate the DSP mixer and DSP effects installed on the AXR4 device. Window Examples and How to Open the Window Window configuration dspMixFx AXR is composed of five windows including the Mixer window. Mixer window Matrix Mixer window Meter window...

  • Page 37: Mixer Window

    Software How to open dspMixFx AXR “Applications”  “dspMixFx AXR” Mixer Window This window is used to control the mixer. 1 Input Channels area (page 2 Output Channels area (page 3 Right side bar (page 4 Left side bar (page 5 Menu (page 6 Scroll bar...

  • Page 38: Input Channels Area

    Software Input Channels Area Channel label *Red box section This area is used to configure input channel settings. If you are unable to display all channels due to the window size, use the scroll bar to display the intended channels. You can switch between stereo and mono for all input channels.
  • Page 39 Software 7 [ϕ] button Input Settings area — Head amp Switches phase inversion on and off. When channels are stereo linked, the [ϕ] button will appear for both left and right channels. • Left click the input gain control knob while holding down the <Ctrl>...
  • Page 40 Software 4 Select FX (SLOT 1) SILK (Display all) Used to select an effect and display the currently selected effect. 5 FX Bypass button (SLOT 2) Bypass switch for the inserted effect. 6 FX Edit button (SLOT 2) Configures inserted effect settings. 1 SILK button 7 Select FX (SLOT 2) Switches the Silk function on and off.
  • Page 41 Software PAN/FADER area How to use the Mix Bus (Send Destination) option and the drop down menu Click the mix bus (send destination) to display a list of mix buses available for routing. Click a mix bus from the list displayed for routing. •...

  • Page 42: Output Channels Area

    To record the loopbacked audio in the computer, select “Steinberg AXR4” in the Windows sound settings, or select “Steinberg AXR4 2TR” in the Mac sound input settings. 2 FX Bypass button (SLOT 1) Bypass switch for the inserted effect.
  • Page 43 Software Reverb Return (Display all) PAN/FADER area 1 Reverb Return knob Adjusts the reverb return amount. 2 Reverb Return amount Used to display and edit the reverb return amount. • Left click the Reverb Return knob while holding down the <Ctrl> key (Windows) or click the Reverb Return knob while holding down the <command>...

  • Page 44: Right Side Bar

    Software 3 Reverb Edit button Right Side Bar Opens the reverb advanced settings This is used to open and close, and show and window. hide areas on the channel strip, and configure REV-X settings. 4 Select Reverb Type Selects a reverb type. 5 Reverb Time settings knob Adjusts the reverb time.

  • Page 45: Left Side Bar

    Software Left Side Bar Switch between Display all/ Reduced display This is used to switch between display all/ reduced display, or to show/hide functions in the input channels area and the output channels area. 1 INPUT Switches between display all/reduced display for input settings.
  • Page 46 Software Filtering buttons 1 [Analog] button Shows/hides analog input channels (MIC and LINE channels for hardware inputs). 2 [Digital] button Shows/hides digital input channels (ADAT, S/PDIF, AES/EBU channels for hardware inputs). 3 [DAW] button Shows/hides DAW input channels. AXR4 Operation Manual...

  • Page 47: Relational Tables

    Software Relational Tables Information on available operations by channel type, and display all mode and reduced display mode correspondence is provided in the tables below. Item Description HARDWARE ANALOG DIGITAL 1 – 2 CH 3 – 4 CH 5 – 12 CH 13 CH onwards All CH Display...

  • Page 48: Menu

    Software Menu For further information on menu items, see descriptions on each function. 1 File (page File Used to open and save sessions. This menu is used to open and saves sessions. 2 Edit (page Used to configure system-wide settings at Open once.
  • Page 49 Software  Set Default Channel Names Scene Sets all channel names to their default This menu is used to store and recall AXR4 settings. device scenes.  Set Default Routing Sets DAW outputs directly to hardware output • The Initial Data scene is a scene used to restore mixer settings to the default factory settings.
  • Page 50 Software Help This menu is used to open the Operation Manual, and information relating to the AXR4 device. Help Opens the Operation Manual (this document). About Displays information about the AXR4 device. Device This menu is used to select and display devices controlled with dspMixFx AXR.

  • Page 51: Matrix Mixer Window

    Software Matrix Mixer Window This window is used for signal routing. How to open the window “Window” menu  “Matrix Mixer” Matrix Mixer display The Matrix Mixer window is composed of two areas, an area for routing inputs to a mix bus, and an area for routing DAW or PC/Mac system sounds to a mix bus.
  • Page 52 Software How to use the grid Turns routing off. Mouse over Edit… Used to highlight vertical and horizontal lines, Opens the settings dialog box. including the grid area itself. Settings dialog Left click (Windows) / Click (Mac) Used to select an area on the grid. 1 Send amount Used to display and edit the send amount.
  • Page 53 Software <Ctrl> key + left click (Windows) If the pan setting is moved to the leftmost in this state, the signal being sent to the right will stop and the <command> key + click (Mac) equivalent grid area on the right will automatically be Used to select multiple individual grid cells by turned off.

  • Page 54: Meter Window

    Software Meter Window This window is used to display all meters. Hardware Input Channels area DAW Channels area Mix Buses area How to open the window Filtering display channels “Window” menu  “Meter” You can show/hide items on the Meter window.

  • Page 55: Show/Hide Channels Window

    Software Show/Hide Channels Window This window is used to show/hide each channel. Hardware Input Channels DAW Channels Hardware Output Channels How to open the window “Window” menu  “Show/Hide Channels” How to use the Show/Hide Channels window Turn boxes with a signal name on (green) or off (gray) to show/hide the corresponding channel. —...

  • Page 56: Settings Window

    Used to select the interface standard “Window” menu  “Settings” connecting the AXR4 with the computer. General Settings Select USB for the AXR4U, and Thunderbolt for the This area is used to configure general system AXR4T. settings. 2 [Control Panel] button Opens the driver control panel for the interface selected.
  • Page 57 Software 4 Conversion Mode 3 HPF Used to display and edit AD/DA converter Used to select the frequency of the high filter settings. The AD/DA converter has pass filter for analog input from 40 Hz, two filter setting options available: LINEAR 60 Hz, 80 Hz, 100 Hz and 120 Hz.
  • Page 58 Software Output Routing This area is used to configure routing settings from mix buses to output connector. Output connector will appear from top to bottom to the right of Output Routing, and mix buses will appear from left to right above Output Routing.

  • Page 59: Building A Monitoring Environment

    Software Building a Monitoring Environment Configuring settings on the Matrix Mixer window This section describes the process used to build a monitoring environment for a vocalist On the Matrix Mixer window (page 51), and an engineer when recording vocals. double click each corresponding grid cell to route input from the microphone to the The example used in this section assumes the LINE 1/2 output bus and the LINE 3/4...
  • Page 60 Software Configuring settings on the DAW Set the MIC 1 channel and DAW channel mix bus (send destination) to LINE 3/4. Set the output from the DAW to the AXR4. Adjust MIC 1 channel faders, DAW channel faders, LINE 3/4 output faders and the Configuring settings on the Mixer headphone 2 knob controls to create a mix balance to be used by the sound engineer.

  • Page 61: Stacking The Axr4T

    Software Stacking the AXR4T A Thunderbolt 3 to Thunderbolt 2 adapter is not required when you use a Mac equipped with a Up to three AXR4Ts can be stacked in a daisy- Thunderbolt 2 connector. chain connection using Thunderbolt cables. When multiple AXR4Ts are connected, each Use Thunderbolt 2-certified cables to AXR4T will be identified using their STACK ID.

  • Page 62: Configuring Axr4 Settings In Cubase (Axr Extension)

    Software Configuring AXR4 Settings Edit parameters function The edit parameters function is used to control in Cubase (AXR Extension) hardware input/headphone assignments for the connected AXR4 device from the audio track selected in the Cubase project. Window Configuration Using AXR Extension allows you to operate AXR4 devices connected to a computer with a dedicated Cubase window.
  • Page 63 Software 7 Input meter Header area Displays input levels. The right side of the input meter will be displayed in red when clipping occurs. Click this to stop this display. 1 Inspector tab label 8 HPF button Displays the model name in use. Switches the high pass filter on and off.
  • Page 64 Software Effect Settings area Outputs area This area is used to set parameters related to This area is used to set parameters related to AXR4 input/output port effects. hardware outputs. 1 Name label Displays the name of the hardware output. 1 Pre/Post Switch button 2 Output meter Used to select the insertion point for the...

  • Page 65: Hardware Setup

    Software Hardware Setup DAW-linked function settings area The hardware setup is displayed in Studio Setup dialog in Cubase. This displays information on the hardware setup, and allows you to configure general hardware settings and Cubase-linked function settings. Scene Automatically applies scene information to the How to open Studio Setup AXR4 device when loading a Cubase project On the top of the Cubase window, click...

  • Page 66: Plug-Ins

    Software Plug-ins Equalizer 601 Equalizer 601 uses digital signal processing (VCM effects) based on Yamaha's proprietary VCM (Virtual Circuitry Modeling) technology to emulate the distortion characteristics found in analog equalizers used in the 70s. This provides the audio with a musical drive and saturated distortion effect.
  • Page 67 Software General settings Controls the center frequency of filters in Global parameters appear on the left side of each frequency band. the plug-ins panel. The following parameters are available. Controls filter gain in each frequency 1 DRIVE/CLEAN band. Switches the equalizer type. The DRIVE equalizer applies distortion to give a 4 Filter On/Off greater sense of analog sound.

  • Page 68: Compressor 276

    Software Compressor 276 Compressor 276 uses digital signal processing (VCM effects) based on Yamaha's proprietary VCM (Virtual Circuitry Modeling) technology to emulate the characteristics of an analog compressor used to apply standard audio effects in a recording studio. This results in a more solid sound, making it ideal for drum and bass sounds.
  • Page 69 Software 4 ATTACK Sets the waiting time before the Compressor 276 responds to signals above threshold levels. Increasing the ATTACK time extends the unprocessed signal (attack) amount passed through. 5 RELEASE Sets the time for the gain to return to its original level when the signal drops below threshold levels.

  • Page 70: Rev-X

    Software REV-X How to open the window REV-X is a digital reverb effect developed by From dspMixFx AXR Yamaha for pro audio applications. “Mixer window”  “Reverb Edit button” One REV-X effect is included in the AXR4 (page device. Input signals can be sent to the REV-X effect.
  • Page 71 Software 3 Decay @ Graph Adjusts the characteristic of the envelope Indicates the characteristics of from the moment the reverberation starts reverberation. The vertical axis indicates to the moment it attenuates and stops. the signal level, the horizontal axis Range: 0 – 63 indicates the time, and the Z-axis indicates the frequency.

  • Page 72: Sweet Spot Morphing Channel Strip

    Software Sweet Spot Morphing Channel How to open the window Strip From dspMixFx AXR “Mixer window”  “FX Edit button” The Sweet Spot Morphing Channel Strip (page (“Channel Strip” for short) is a multi-effect that From the dedicated Cubase series combines compressor and equalizer.
  • Page 73 Software 8 COMPRESSOR On/Off Compressor Turns the compressor on (lit) and off (dark). 9 Compressor Curve Indicates the approximate compressor response. The vertical axis indicates the output signal level, and the horizontal axis indicates the input signal level. ) Gain Reduction Meter Displays the gain reduction amount of the compressor.
  • Page 74 Software 4 MID Q Adjusts the band width of the middle band. Range: 0.50 – 16.00 5 MID F Adjusts the center frequency of the middle band. Range: 20.0 Hz – 20.0 kHz 6 MID G Adjusts the gain of the middle band. Range: -18.0 dB –...

  • Page 75: Operation Correspondence Table

    Operation Correspondence Table Operation Correspondence Table Number of I/O channels by sample rate AXR4T/AXR4U (USB 3.0) INPUT DIGITAL (A) DIGITAL (B) LINE ADAT S/PDIF ADAT S/PDIF AES/EBU 44.1/48kHz 88.2/96kHz 176.4/192kHz 352.8/384kHz OUTPUT DIGITAL (A) DIGITAL (B) LINE ADAT S/PDIF ADAT...
  • Page 76 Operation Correspondence Table DSP resource restrictions by sample rate Channel Strip REV-X Mono Stereo 44.1 kHz – 96 kHz 176.4/192 kHz 352.8/384 kHz Restrictions on using the built-in effects on Cubase series programs Monitoring Recording Channel Channel REV-X REV-X Strip Strip Post Post...

  • Page 77: Troubleshooting

    USB host controller installed on the computer. If this happens, try changing the USB mode to High-Speed (USB 2.0) in Control Panel on the Yamaha Steinberg USB Driver (page 33). AXR4 Operation Manual...
  • Page 78 • Issues with recording and playback may external devices occur if the speed of the internal HDD in your computer is too slow. • (For AXR4U) Is an appropriate USB mode selected? • Try increasing your computer’s memory. High-Speed (USB 2.0) has a more narrow •...
  • Page 79 AXR4 device firmware version can be confirmed on the following website: https://www.steinberg.net/ • (Mac only) Is “Yamaha Steinberg Thunderbolt (High Precision)” used with Cubase? Cubase makes exclusive use of these drivers, and therefore they are not available for use by other applications.

  • Page 80: Technical Specifications

    Technical Specifications Technical Specifications MIC/LINE INPUT 1-4 (Balanced) Frequency Response +0.1/-0.1dB, 10Hz to 22kHz @48kHz +0.1/-0.2dB, 10Hz to 44kHz @96kHz +0.1/-0.5dB, 10Hz to 88kHz @192kHz +0.1/-3dB, 10Hz to 100kHz @384kHz Dynamic Range 119dB, A-Weighted THD+N 0.0004%, 1kHz, 22Hz/20kHz BPF Maximum Input Level +24dBu Input Impedance 3.3k Ohm...
  • Page 81 1: Ground, 2: Hot (+), 3: Cold (-) *The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Steinberg website then download the manual file.  [AES/EBU] Connector...

  • Page 82: Error Messages

    The compatibility of the TOOLS for AXR4 version and the AXR4 device firmware version can be confirmed on the following website: https://www.steinberg.net/ DAW application and Display You have attempted to Close dspMixFx AXR or dspMixFx must be quit. change the USB MODE...

  • Page 83: Block Diagram

    Block Diagram Block Diagram AXR4 Operation Manual...
  • Page 84 Block Diagram AXR4 Operation Manual...
  • Page 85 Block Diagram AXR4 Operation Manual...
  • Page 86 Block Diagram AXR4 Operation Manual...
  • Page 87 Block Diagram AXR4 Operation Manual...
  • Page 88 Block Diagram AXR4 Operation Manual...

  • Page 89: Software License And Copyrights

    Software License and Copyrights Software License and Copyrights GNU GENERAL PUBLIC LICENSE Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Version 2, June 1991 Program is covered only if its contents constitute a work based on Copyright ©...
  • Page 90 Software License and Copyrights readable copy of the corresponding source code, to be This section is intended to make thoroughly clear what is believed to distributed under the terms of Sections 1 and 2 above on a be a consequence of the rest of this License. medium customarily used for software interchange;...
  • Page 91 Software License and Copyrights The MIT License (MIT) one line to give the program's name and an idea of what it does. Copyright © yyyy name of author Permission is hereby granted, free of charge, to any person This program is free software; you can redistribute it and/or modify it obtaining a copy of this software and associated documentation files under the terms of the GNU General Public License as published by (the “Software”), to deal in the Software without restriction, including...

  • Page 92: Index

    Index Index dspMixFx AXR ............ 36 +48V ..............25, 26 Edit ..............48 Effect Bypass ............. 64 ABOUT ............20, 50 Effect Settings ............ 64 AD/DA converter ..........12 Equalizer ............73 ADAT ...............7, 14 Equalizer 601 ............. 66 AES/EBU ............7, 13 Error Messages ..........82 AES/EBU CH ..........13, 15 ANALOG SETUP ..........24 AXR Extension .............62...
  • Page 93 Index PHASE ............ 25, 27, 28 Phase ............39, 63 Knob Mode ............56 PHONES knobs ............ 5 PHONES PATCH ..........22 Post Fader Send for Reverb ....... 57 LED colors .............12, 18 Pre/Post Switch ..........64 Level meter ...........41, 43 LINE ..............4 LINE INPUT ............7 Rack-mounting .............
  • Page 94 Word clock ............12, 13 Yamaha Steinberg Thunderbolt Driver ....31 Yamaha Steinberg USB Driver ......33 About copyrights • Steinberg is a registered trademark of Steinberg Media Technologies GmbH. ® • Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
  • Page 95 Steinberg Website https://www.steinberg.net/ Manual Development Group © 2018 Yamaha Corporation Published 09/2019 MW-C0...

This manual is also suitable for:

Axr4t

Table of Contents