F5 Corpus
7. Remove the four M6x12 bolts. The plate and plastic cover are now
disassembled.
8. Remove the two M6x12 bolts securing the rear seat bar to the top
plate.
9. Remove the four M6x25 bolts. Carefully slide the width adjustment
brackets together with the UniTrack rail.
10. Push the plate and plastic cover backwards to expose the two bolts
securing the end stop.
94
Repairs - Chassis
Figure 266. The placement of the four bolts.
Figure 267. The placement of the two bolts.
A
Figure 268. Be careful when you slide the brackets with
the UniTrack.
Figure 269. Depending on seat depth, you might need
to move the backrest as well.