F5 Corpus
4.1.14
Articulating leg rest
For this task the following tools are necessary:
• 1 Torque wrench.
• 1 Allen key 5 mm.
• 1 Allen key 8 mm.
• 1 Socket 17 mm.
• 1 Circlip pliers.
WARNING!
Risk of injury while working on the leg rest
Do not place any weight on the leg rest while working on it.
4.1.14.1 Removing leg rest
1. Switch off the main power switch on the control panel.
2. Remove the leg rest's top cover by carefully pulling it straight out.
3. Disconnect the articulation actuator by dividing the connector on its
cable.
4. Remove the front ends of the UniTrack rails.
Figure 142. On/Off symbol depending on model.
Figure 143. Remove the leg rest's top cover by carefully
pulling it straight out.
Figure 144. Remove the front ends of the UniTrack rails.
Repairs - Seat
57