Permobil F5 Corpus VS User Manual
  1. Manuals
  2. Brands
  3. Permobil Manuals
  4. Wheelchair
  5. F5 Corpus VS
  6. User manual

Permobil F5 Corpus VS User Manual

Hide thumbs Also See for F5 Corpus VS:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
F5 Corpus VS
|
User manual
British English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F5 Corpus VS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Permobil F5 Corpus VS

Summary of Contents for Permobil F5 Corpus VS

  • Page 1 F5 Corpus VS User manual British English...
  • Page 2 Welcome to the Permobil family We hope that you enjoy your new powered wheelchair. (+44) (0)1484 Permobil's founder, Dr. Per Uddén, believed that every person Permobil Ltd. 722 888 has the right to have his or her disability compensated as far as...
  • Page 3 We hope that you enjoy your new powered wheelchair. www.permobil.com Permobil's founder, Dr. Per Uddén, believed that every person has the right to have his or her disability compensated as far as possible using the same technology that we all use in our everyday life.
  • Page 4 Welcome to the Permobil family We hope that you enjoy your new powered wheelchair. Permobil's founder, Dr. Per Uddén, believed that every person has the right to have his or her disability compensated as far as possible using the same technology that we all use in our everyday life.

  • Page 5: Table Of Contents

    Introduction 4.10.1 Headrest 4.10.2 Headrest with link hardware Overview 4.10.3 Removing the backrest 4.10.4 Armrest Wheelchair specification 4.10.5 Footplates Tool bag 4.10.6 Lumbar support General control panel 4.10.7 Trunk support Omni2 4.10.8 Chest support Connected wheelchair 4.10.9 Knee support Lights and reflectors 4.10.10 Rotational panel holder 4.10.11...

  • Page 6: Introduction

    It instructs you on how to properly and safely use and care for your wheelchair. This user manual and additional information concerning our products are available at www.permobil.com or by telephone. Your power wheelchair is a complex medical device prescribed to you by your healthcare provider and configured to meet your needs.

  • Page 7: Overview

    The parts on the overview illustration are described in more detail throughout the manual. The Permobil F5 Corpus VS is a front-wheel drive powered wheelchair for outdoor and indoor driving. It has a standing function. It is intended for people limited to a seated position.

  • Page 8: Wheelchair Specification

    Wheelchair specification F5 Corpus VS Product name: Wheelchair class: Sitting position Height: 1090–1170 mm (43"–46") Width: 650–790 mm (25.5"–31") Length: 1165 mm (46") Standing position Height: 1920 mm (76") Width: 790 mm (31") Length: 1260 mm (50") Smallest transportation size Height: 825–875 mm (32.5"–34.5")

  • Page 9: Tool Bag

    Tool bag The wheelchair comes with a tool bag for maintenance and adjustments. It contains the following tools: Spanner General maintenance. 11 mm 13 mm Allen keys General maintenance and seat adjustment. 3-6 mm Socket spanner General maintenance. 15 mm Valve adapter Inflating the castor wheels Overview - 9...

  • Page 10: General Control Panel

    General control panel Joystick Example of button functions A. On/off B. Horn C. Decrease maximum speed D. Increase maximum speed For more information, see the user manual of your control panel: https://documentation.permobil.com/ manuals/control_panels/ 10 - Overview...

  • Page 11: Omni2

    Omni2 Your wheelchair can be equipped with an Omni2. An Omni2 is a device that makes it possible to operate the wheelchair with something other than a standard joystick. Button configuration for Omni2. A. On/off E. LCD screen B. Profile F.

  • Page 12: Connected Wheelchair

    Connected wheelchair ConnectMe contains a radio transmitter. In certain areas, radio transmission is not allowed and ConnectMe must be set to flight mode For more information, see the user manual of your control panel: https://documentation.permobil.com/ manuals/control_panels/ 12 - Overview...

  • Page 13: Lights And Reflectors

    Lights and reflectors The wheelchair is equipped with reflectors at the front, the rear, and the sides. Front lights, rear lights, and turn signals are optional. Front reflectors Rear reflectors Side reflectors Overview - 13...

  • Page 14: Wheels

    Wheels The wheelchair drive wheels have pneumatic tyres or flat-free (foam filled) tyres. The castor wheels have pneumatic tyres or solid polyurethane tyres. Pneumatic tyres Flat-free (foam filled) tyres Inflating the pneumatic tyres. See page 65. 14 - Overview...

  • Page 15: Tie-Down Points

    Tie-down points The wheelchair is equipped with four tie-down points used for transportation . Two in the front and two in the rear Vehicle transportation. See page 35. Overview - 15...

  • Page 16: Serial Number Label

    Serial number label The serial number label is located on the lower, left-hand side of the wheelchair chassis. Look to the right of the drive wheel. A. Made in (country of final assembly) by (address of site of final assembly) B.

  • Page 17: Accessories

    2.10 Accessories Accessories for Permobil products are subject to continuous development. Contact your nearest Permobil dealer for more information on the accessories available for your product. Overview - 17...

  • Page 18: Spare Parts

    2.11 Spare parts Spare parts must be ordered through Permobil. 18 - Overview...

  • Page 19: User Manual

    2.12 User manual Main text area Main illustration area Text correlates to the illustration to the right Tool list Instruction steps Warning sign Chapter and page number Overview - 19...

  • Page 20: Safety

    This chapter contains important information about how Indicates important information. to safely use your wheelchair. Permobil is not responsible for personal injuries or property Warning signs damage resulting from any person’s failure to follow the warnings and instructions in this manual or from failure to Do not overload the wheelchair exercise good judgement.
  • Page 21 Do not modify the wheelchair Do not exceed the maximum user weight Do not modify your wheelchair or any of its components. Your wheelchair has been configured specifically for your needs as Do not drive the wheelchair if you exceed the maximum user prescribed by your healthcare provider.
  • Page 22 In a traffic accident, they do not provide the same other causes, you must inform Permobil as soon as possible protection as vehicle mounted seatbelts. and immediately stop using your wheelchair. There is a risk that the wheelchair or its accessories can no longer be used safely.
  • Page 23 Events like these may Armrest falling backward lead to significant damage that is impossible to detect upon inspection. Contact your service provider or Permobil. Some combinations of armrest height and armrest angle may Damage caused by these types of incidents exceeds the cause the armrest to fall backward when the backrest is tilted limits covered by the manufacturer’s guarantee.

  • Page 24: Labels

    These labels are described in greater detail in this subchapter. Do not remove labels from the wheelchair. If a label becomes difficult to read or falls off, order a replacement from Permobil. Warning This label indicates that special attention is required.
  • Page 25 Freewheel mode The image above the arrows indicates that the wheelchair is not in freewheel mode. The illustrations below the arrows indicate that the wheelchair is in freewheel mode. Read more about freewheel mode on page 35. Tie-down points This label shows the wheelchair’s tie-down points. Read more about wheelchair transportation on page 35.

  • Page 26: Wheelchair Usage

    You must always drive your wheelchair carefully and defensively. Your wheelchair is a complex medical device, not a car. Due to the individualised nature of Permobil products, your wheelchair is equipped with one of numerous different ways to drive it. The most common way is described below, but your wheelchair may not conform to this process depending on its individualisation.
  • Page 27 Driving restrictions The wheelchair consumes a lot of power when you drive up a hill, climb over obstacles, or drive on rough terrain (for example, sand). Permobil recommends that you, as far as possible, avoid driving for a long period of time in these types of conditions.
  • Page 28 Permobil recommends that you do not use the wheelchair in extreme conditions, such as heavy rain, thick snow, or excessive heat or cold. Prolonged exposure to sunlight or cold temperatures can cause wheelchair surfaces to become very hot or cold. The driving range of your wheelchair is approximately 25 km (16 mi) when the battery temperature is 25°C (77°F).

  • Page 29: Seat Functions

    • when there are ridges that could cause the wheelchair to move in a different direction When you drive over an obstacle, always directly face it. You can drive over obstacles up to 75 mm (3"). If you drive over higher obstacles, there is a greater risk of tipping and of damage to the wheelchair.
  • Page 30 Due to the custom nature of Permobil products, your wheelchair is equipped with one of numerous different ways to adjust its seat functions. For additional information on how to control your wheelchair, refer to any other documentation received with your wheelchair or contact your Permobil dealer.

  • Page 31: Seat Lift

    4.2.1 Seat lift The seat lift lifts and lowers the seat. When the seat is lifted, the maximum speed of the wheelchair may be reduced automatically or the ability to drive the wheelchair may be restricted completely. The reduced maximum speed may be indicated with a turtle on the display of the control panel, and the drive restriction may be indicated with a red light.
  • Page 32 4.2.3 Standing function The standing function makes it possible for you to stand up in the wheelchair. When you stand up, the maximum speed of the wheelchair is reduced automatically. This may be indicated with a turtle on the display of the control panel.
  • Page 33 4.2.4 Backrest tilt The backrest tilt tilts the backrest backwards and back up again. When the backrest is tilted, the maximum speed of the wheelchair may be reduced automatically or the ability to drive the wheelchair may be restricted completely. The reduced maximum speed may be indicated with a turtle on the display of the control panel and by a yellow light on the switch box.

  • Page 34: Charging The Batteries

    If the batteries become completely discharged, charge them immediately. Charge the batteries in a well-ventilated, dry room. Only use a Permobil charger intended for use with your wheelchair. It is not possible to drive the wheelchair while it charges.

  • Page 35: Freewheel Mode

    Freewheel mode The wheelchair is fitted with two freewheel levers. When the freewheel levers are released, the wheelchair’s brakes are disengaged from the motor. When in freewheel mode, the wheelchair can be moved manually, but cannot be controlled electronically. When the wheelchair is in freewheel mode, it must not be possible to drive the wheelchair.
  • Page 36 4.5.1 Securing the wheelchair in a vehicle This chapter describes how you secure the wheelchair in a vehicle. You can either secure the wheelchair at its tie-down points or use a docking system that complies with ISO 10542–1:2012, which is an international standard that governs wheelchair tie-downs and occupant-restraint systems.
  • Page 37 After you have secured the straps to your wheelchair, secure the other end of the straps to your vehicle according to the appropriate instructions. The end- fitting on the strap must comply with ISO 10542–1:2012, which is an international standard that governs wheelchair tie-downs and occupant- restraint systems.
  • Page 38 4.5.2 Using the wheelchair as a seat in a vehicle Permobil recommends that you transfer to a vehicle seat and that you use the vehicle’s restraint systems. The unoccupied wheelchair should be stored in a cargo area or secured in the vehicle during travel. Follow the instructions below if you want to use the wheelchair as a seat in a vehicle.

  • Page 39: Air Transportation

    The shoulder-belt restraint should be worn over the shoulder. The pelvic-belt restraint should be worn low across the pelvis and within the preferred zone of 30° to 75°. It is desirable to have a steeper angle within the preferred zone. Make sure that the wheelchair is not lifted or tilted.

  • Page 40: Rail Transportation

    Cover the control panel and other sensitive objects with soft, shock-absorbing material (foam plastic or similar). Push the control panel toward the backrest. Tape any loose cables to the seat or hoods. Rail transportation Regulation (EU) 1300/2014 concerns the interoperability of the European rail network.

  • Page 41: Wheelchair Storage

    Wheelchair storage You can store your wheelchair for a short or long period of time. When you store for a short time, make sure that the room is dry and at least 5°C (41°F). If the temperature is lower, the batteries might not charge fully. They are also more vulnerable to corrosion.
  • Page 42 This is how you adjust the height and depth of the headrest. 1. Loosen handle on the backrest. 2. Adjust the height or depth as required. 3. Tighten handle This is how you adjust the angle of the headrest. 1. Loosen handle on the rear of the headrest.

  • Page 43: Headrest With Link Hardware

    This is how you remove and install the headrest. 1. Loosen handle on the backrest. 2. Lift the headrest straight up. Install the headrest in the reverse order. You can remove and install the headrest without affecting current settings. 4.10.2 Headrest with link hardware This chapter shows you how to adjust the height, depth, and angle of the headrest.
  • Page 44 This is how you adjust the height and depth of the headrest. Allen key 5 mm 1. Loosen the screw at each link 2. Change the angle of the links as required. 3. Tighten the screws. This is how you adjust the angle of the headrest. Allen key 5 mm 1.
  • Page 45 This is how you remove and install the headrest. 1. Loosen handle at the rear of the backrest. 2. Lift the headrest straight up ( ). Install in the reverse order. You can remove and install the headrest without affecting current settings. Wheelchair usage - 45...

  • Page 46: Removing The Backrest

    4.10.3 Removing the backrest You can remove the backrest to make transportation of the wheelchair easier. First, remove backrest cushion . It is attached with Velcro. Then carefully undo clip on the backrest and pull the upper part of the backrest straight up ( ).
  • Page 47 4.10.4.1 Swivelling armrest This chapter describes how you adjust a swivelling armrest. A swivelling armrest is an armrest that you can push in or out as preferred between certain settings. There are three swivel settings ( , ) and one locked setting ( Rotation settings Factory setting Locked...
  • Page 48 4.10.4.2 Armrest height and armrest angles This chapter shows you how to adjust the height of the armrest and the angles of the armrest. There are two ways to adjust the armrest angle. This is how you adjust the height of the armrest. You can see the current height of the armrest on the backrest.
  • Page 49 This is one way to adjust the angle of the armrest. The lower lock nut has a left-hand thread. Spanner 14 mm 1. Loosen the two lock nuts on adjustment bar 2. Turn the adjustment bars to adjust the armrest angle to the preferred position.
  • Page 50 This is the other way to adjust the angle of the armrest. Allen key 5 mm 1. Move the screw from fixed position to flexible position 2. Adjust the armrest to the preferred angle. 3. Tighten screw 50 - Wheelchair usage...

  • Page 51: Footplates

    4.10.5 Footplates You can adjust the height and the angle of the footplates. This is how you adjust the height of the footplates. You can adjust the footplates separately if you prefer them at different heights. Allen key 5 mm 1.

  • Page 52: Lumbar Support

    4.10.6 Lumbar support This chapter shows you how to adjust the lumbar support. The lumbar support consists of three back cushions with Velcro. If you want to adjust it, simply remove the backrest cushion and adjust the lumbar support as preferred.

  • Page 53: Trunk Support

    4.10.7 Trunk support This chapter shows you how to adjust the height of the trunk support. This is how you adjust the height of the trunk support. Allen key 5 mm 1. Remove the backrest cushion. 2. Loosen screw on the backrest that holds the trunk support in place. 3.

  • Page 54: Chest Support

    4.10.8 Chest support You can adjust the height and the depth of the chest support. This is how you adjust height of the chest support. Allen key 3 mm 1. Loosen screws on the locking ring on either side of the chest support. 2.

  • Page 55: Knee Support

    4.10.9 Knee support This chapter shows you how to remove and attach the knee support. All adjustments of the knee support must be made by an authorised service technician. You can remove the knee support from the leg rest to make it easier to get in and out of the wheelchair.

  • Page 56: Rotational Panel Holder

    4.10.10 Rotational panel holder You can adjust the distance between the armrest and the control panel, the resistance of the rotational panel holder, and the angle of the rotational panel holder. This is how you adjust the distance between the armrest and the control panel.
  • Page 57 You can angle the rotational control panel to either side. This is how you adjust the angle. Allen key 4 mm 1. Remove screw on the side you want to angle. 2. Loosen the other screw 3. Adjust panel to the preferred angle. 4.

  • Page 58: Parallel Panel Holder

    4.10.11 Parallel panel holder You can adjust the distance between the armrest and the control panel. It is also possible to adjust the angle of the control panel. This is how you adjust the distance between the armrest and the control panel.
  • Page 59 This is how you adjust the angle of the control panel. Allen key 4 mm Slide the panel to the preferred position. You can loosen or tighten screw to adjust the resistance. Wheelchair usage - 59...

  • Page 60: Positioning Belt

    4.10.12 Positioning belt There is an accessory rail on each side of the seat frame, for example, for attaching a positioning belt. Spanner 10 mm 1. Screw the positioning belt in place in the rail’s upper groove. 2. Make sure that the belt buckle locks properly in the snap lock. 60 - Wheelchair usage...

  • Page 61: Maintenance

    A well maintained wheelchair lasts longer and has a lower risk of defects. Only carry out maintenance and minor adjustments that are specified in the user manual. All other maintenance, service, and repairs must be carried out by a qualified service technician authorised by Permobil. Maintenance - 61...

  • Page 62: Maintenance And Inspection Schedule

    Maintenance and inspection schedule Permobil recommends compliance with the following maintenance and inspection schedule. Contact your authorised dealer for all service-related needs or questions. Maintenance and inspection schedule Daily Weekly Monthly Yearly Check battery level indicator and charge the wheelchair if necessary.
  • Page 63 Maintenance and inspection schedule Daily Weekly Monthly Yearly Check that the freewheel mode and the freewheel lever work properly. Complete inspection, safety check , and service performed by an authorised wheelchair dealer. Maintenance - 63...

  • Page 64: Cleaning

    Cleaning Regular care and maintenance will prevent unnecessary wear and damage to your Permobil product. Turn off the power before you clean the wheelchair. 5.2.1 Metal surfaces Due to the high quality powder coating, optimum corrosion protection is guaranteed. Ideally, use a soft cloth or sponge, hot water, and a mild detergent for normal cleaning.

  • Page 65: Inflating The Drive Wheel Tyres

    Inflating the drive wheel tyres Only drive the wheelchair with the correct tyre pressure. The tyre pressure for the drive wheel tyres is 250 kPa (35 psi). Permobil recommends that you check the tyre pressure weekly and after any significant change in temperature or altitude.

  • Page 66: Inflating The Castor Wheel Tyres

    Inflating the castor wheel tyres Permobil recommends that you check the tyre pressure weekly and after any significant change in temperature or altitude. Incorrect tyre pressure may make the wheelchair unstable and difficult to drive. It can also result in abnormal wear, a shorter driving range, and damage to the wheel assembly.

  • Page 67: Restrictions And Limitations

    Restrictions and limitations This chapter contains information about seat depth. Users above 110 kg (240 lb.) must have a seat depth of 445 mm (17") or more. If your wheelchair has a seat depth of less than 445 mm (17") and your weight increases to more than 110 kg (240 lb.), contact your service technician.

  • Page 68: Troubleshooting

    Note that the guide cannot describe all the problems and events which may occur and you should always contact your service provider or Permobil technical support if you need additional assistance. Troubleshooting and repairs of electronics must always be performed by qualified personnel with good knowledge of the wheelchair’s electronics.
  • Page 69 Possible cause Remedy Event The battery charger is connected. Disconnect the battery charger. The wheelchair is in freewheel mode. Exit freewheel mode and restart the wheelchair. The wheelchair is locked. Unlock the wheelchair. The wheelchair cannot be driven. A seat function has triggered the Make sure that the backrest and the leg automatic drive inhibit.

  • Page 70: General Information

    • U.S. Food and Drug Administration’s regulation 21 CFR 820 • Medical Devices Directive (93/42/EEC) Reporting incidents If an incident occurs, please contact Permobil by phone or e-mail. Disposal and recycling Contact Permobil for information about disposal agreements in force.

  • Page 71: Technical Specifications

    Technical specifications Mass of the heaviest part Backrest 7.5 kg (16.5 lb.) Pivot width 1200 mm (47") Minimum turning diameter 1490 mm (59") Required width of angled corridor 800 mm (31.5") Required doorway entry depth 1350 mm (53") Required corridor width for side opening 800 mm (31.5") Ground clearance 80 mm (3")
  • Page 72 How to contact your production unit Nashville, USA Timrå, Sweden PU TIM PU NAS Permobil AB Permobil Inc. Per Uddéns väg 20 300 Duke Drive Lebanon, TN 37090 SE 861 36 Timrå Sweden +46 60 59 59 00 +1 800 736 0925...
  • Page 73 Contact.BRAPAC@permobil.com info@permobil.com www.permobil.com www.permobil.com PU TIM PU TIM New Zealand Ireland, United Kingdom Permobil New Zealand Permobil Ltd. Regus 6th floor, 2 Kingdom 181A McLeod Road Street, Paddington Te Atatu South, Auckland, 0610 New Zealand W2 6BD London United Kingdom +64 0800 115 222 Sales.NZ@permobil.com...
  • Page 74 New Zealand Ireland, United Kingdom info@permobil.uk PU NAS www.permobil.com PU TIM 74 - How to contact your local office...
  • Page 75 Dealer’s address and telephone number...
  • Page 76 335339 eng-UK www.permobil.com 7 330818 354334...

This manual is also suitable for:

F5 corpus

Table of Contents