F5 Corpus
13. The cable brackets are mounted with one screw each. Use a Torque
wrench to tighten the screws. Tightening torque 0.9 lb.ft.
14. The bus cables are tied together with two cable ties, at regular
distances on the cable loop.
15. The bus cables are connected to the ICS master module.
Repairs - Control panel and electronics
Figure 482. The cable is mounted with three cable
brackets on the pillar, each mounted with a screw.
Figure 483. The bus cables are tied together with two
cable ties, at regular distances on the cable loop.
Figure 484. The bus cables are connected to the ICS
master module.
161