F5 Corpus
2. Adjust the panel to the preferred position. Leave at least a gap of
0.4 inches between the armrest and the panel.
3. Tighten the screw. Tightening torque 7.2 lb.ft.
Adjusting the friction joint
1. Undo the screw or the knob to make the friction joint more loose.
Adjustments - Seat
Figure 532. Adjusting the position on the new model of
the parallel panel holder.
Figure 533. Adjusting the control panel position on the
earlier models of the parallel panel holder.
Figure 534. The screw's position on the new model of
the parallel panel holder.
Figure 535. The knob position on the earlier models of
the parallel panel holder.
179