Permobil F5 Corpus Service Manual page 158

F5 Corpus
3. The cable loop between the upper and lower cable bracket should
be 5".
4. The ICS bus cable is connected to the seventh position of the
connector block on the right hand side of the seat.
5. The ICS bus cable is laid across the seat frame and mounted in the
two cable brackets. Avoid crossing the cables with each other
between the connector block and the first cable bracket on top of
the seat. Use a Torque wrench to tighten the screws. Tightening
torque 0.9 lb.ft.
158
Repairs - Control panel and electronics
Figure 473. The cable loop between the upper and
lower cable bracket should be 5".
Figure 474. The ICS bus cable is connected to the
seventh position of the connector block.
Figure 475. The ICS bus cable is laid across the seat
frame and mounted in the two cable brackets.